1 / 3
Magnification lamp Kotto fume extractor mod.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modify your cheap Harbor freight magnifier lamp to have a fume extraction duct.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
You will need….
- Harbor Freight magnifying lamp. https://www.harborfreight.com/fluorescent-magnifying-lamp-60643.html
- Kotto fume extractor. https://buildkotto.com/collections/all-products/products/kotto-soldering-smoke-absorber-electric-iron-welding-fume-extractor-soldering-smoke-absorber-remover-diy-fume-extractor-filter-with-strong-suction-1
- 3inch/ 7.62cm aluminum ducting.
- Zip ties.
- Aluminium tape
Directions:
- Print all parts out of whatever you like, I would recommend PETG for the bracket as it needs flexibility to snap on.
- Use paint on supports for the crescent hood.
- Insert the 76.6mm adapter in place of the stock fume extraction pipe and secure with aluminum tape.
- Snap on the bracket to the light and insert zip ties.
- slide ducting on to crescent hood and secure with aluminium tape.
- Mount crescent hood to bracket with zip ties.
- Figure out length required for ducting and cut ducting with scissors and a pair of snips for the wire rib.
- Aluminum tape other end to fume extractor.
-<(SIDE NOTE)>-
I highly recommend replacing the stock t9 circline florescent bulb with a led replacement, 3 times the lumen output and it stops your face from sweating from the heat. Look for the “Natural light/ Daylight” option. Great clear unbiased light.
Happy soldering.
