1 / 3
Magnification lamp Kotto fume extractor mod.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modify your cheap Harbor freight magnifier lamp to have a fume extraction duct.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
You will need….
- Harbor Freight magnifying lamp. https://www.harborfreight.com/fluorescent-magnifying-lamp-60643.html
- Kotto fume extractor. https://buildkotto.com/collections/all-products/products/kotto-soldering-smoke-absorber-electric-iron-welding-fume-extractor-soldering-smoke-absorber-remover-diy-fume-extractor-filter-with-strong-suction-1
- 3inch/ 7.62cm aluminum ducting.
- Zip ties.
- Aluminium tape
Directions:
- Print all parts out of whatever you like, I would recommend PETG for the bracket as it needs flexibility to snap on.
- Use paint on supports for the crescent hood.
- Insert the 76.6mm adapter in place of the stock fume extraction pipe and secure with aluminum tape.
- Snap on the bracket to the light and insert zip ties.
- slide ducting on to crescent hood and secure with aluminium tape.
- Mount crescent hood to bracket with zip ties.
- Figure out length required for ducting and cut ducting with scissors and a pair of snips for the wire rib.
- Aluminum tape other end to fume extractor.
-<(SIDE NOTE)>-
I highly recommend replacing the stock t9 circline florescent bulb with a led replacement, 3 times the lumen output and it stops your face from sweating from the heat. Look for the “Natural light/ Daylight” option. Great clear unbiased light.
Happy soldering.
