Zorbiter_Extruder Filament Sensor Mount for MMU use
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
to use the Zorbiter_Extruder with the MMU Filament-Sensor is triggert by Extruder-Gear
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 500
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Zorbiter_Extruder Filament Sensor Mount for MMU use
is for the ZOrbiter V1.5 Geared Extruder by ZARIBO
these Sensor Mount is needet to trigger when Filament is loadet to the Extruder-Gear
and based on
ZOrbiter V1.5 Geared Extruder by ZARIBO
https://www.prusaprinters.org/prints/68982-zorbiter-v15-geared-extruder-by-zaribo
parts need :
1pcs PC4-M10
Prusa-IR-Filament-Sensor (reused from Zorbiter-Extruder)
M2 screw (reused from Zorbiter-Extruder)
M3x10 (reused from Zorbiter-Extruder)
Disasemble the IR-Sensor , Bal and Lever inside the Zorbiter-Extruder
If you use the PC4-M10 , you need to change the Ball-Block with the PTFE-thru-Block
Mount the Prusa-IR-Filament-Sensor with the M2 Screw bettwen both Covers
the Sensor kabel need´s a little bit longer , so you need to pull it from the Einsyboard thrue the Kabel-Loom to the Extruder.
Pay attation when connect the Plug the red kabel show to the Filament-hole (PC4) , the Black to the outside .
the Trigger-Arm needs bettwen the sping and the Orbiter-Lever.
Recommended material: PETG or ABS/ASA.
switch "support on Buildplate” on..
Print orientation :
as it is