Quest 3 Headset Mount for Robots and Autonomous Vehicles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Quest 3 mount designed to securely hold a headset in place while allowing easy removal.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
Overview
This mount was designed to securely attach a Quest 3 headset to a vehicle, object, or robot. It was specifically designed for FIRST Robotics, but can be used for any other project.
Print Settings
- Tree Supports
- Support on Build Plate Only
- 15% infill
- Prints best at 0.2mm layer height or smaller
- Print as shown in the picture to ensure the alignment tabs fit into the headset correctly
- Only tested with PLA, but should work with other materials
Assembly Details
This model was designed to enable easy donning and doffing of the Quest 3 while maintaining a rigid connection and repeatable alignment to the robot/vehicle frame. It is not designed to securely hold a headset on its own. A bungee cord is required!
We recommend using a thin (1/8" or 3/16") bungee cord (link) to hold the headset in place. A channel on the bottom of the mount keeps the bungee cord in place when the headset is removed. Three 10-32 bolts secure the mount to your robot.