1 / 2
15x15 extension 20mm for Voron v0.2 tophat
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extend 15x15 extrusions by 20mm, made with the Voron v0.2 top-hat in mind.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
How to use
I use it to extends the top-hat extrusions, I only used 1, but feel free to print 4 :P
- Print it (I did with “voron settings” and 0.1 layer height to get better overhangs)
- Punch through the covered hole
- Secure the extrusions
- Secure the 80mm extrusion (screw will cover access holes the the other screws)
Why I made it
I ordered a new frame kit for my Voron v0, but it appearantly had 80mm for the top-hat while my acrylics and old frame was 100mm.
I could repurpose the bed extrusions in my case, but that only gave me 3 of 4 needed, so I made this extension and used in one corner.