1 / 2
15x15 extension 20mm for Voron v0.2 tophat
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extend 15x15 extrusions by 20mm, made with the Voron v0.2 top-hat in mind.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
How to use
I use it to extends the top-hat extrusions, I only used 1, but feel free to print 4 :P
- Print it (I did with “voron settings” and 0.1 layer height to get better overhangs)
- Punch through the covered hole
- Secure the extrusions
- Secure the 80mm extrusion (screw will cover access holes the the other screws)
Why I made it
I ordered a new frame kit for my Voron v0, but it appearantly had 80mm for the top-hat while my acrylics and old frame was 100mm.
I could repurpose the bed extrusions in my case, but that only gave me 3 of 4 needed, so I made this extension and used in one corner.