zoom h1 recorder replacement battery cover/sliding lid v.3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cover was made as a replacement part for a zoom h1 audio recorder. Printable on FDM and SLA printers.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This part was made to replace a broken original lid of an old ZOOM H1 portable audio recorder. It was designed with compatibility to FDM-printing and up to 0.2mm resolution in mind.
Printing tips:
The optimal orientation for FDM-printing of the battery cover is shown at the orca-slicer screenshot above.
i would suggest to set the layer height to 0.2mm for the first layer and to 0.12mm for all other layers.
use supports for the "hook" (for the 3 version)
Notes for beginners in 3D-printing:
brim/raft or other means for a better bed adhesion might be needed in some cases - like working with ABS or PLAplus and if z-offset, bed/1st layer temperature or further settings are suboptimal
to avoid possible problems with the print quality be careful with printing speed and cooling
Have a nice print,
good luck!
gexo(-graphix)
2025/2026
This project was realized by using FreeCAD, Orca, gimp, fstl and other GNU/LInux software. Thanks a lot to all volunteers who work on Free Open Source Software (FOSS) and hardware for making this work possible.
All registered brand, company and product names mentioned are property of their respective owners.
P.S.: not suitable for people unable to produce anything by themselves but just make fishy comments