1 / 4
Tern GSD Clubhouse to KBO Ranger Adapter Block
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tern GSD Clubhouse to KBO Ranger mount block.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Printable Description: Mount Block for Tern GSD Clubhouse to KBO Ranger Rear Rack
Safety Note
I do not validate that this mount is safe for carrying kids.
Features
- Includes slots for heavy-duty zip ties for emergency repairs or alternative mounting without hardware.
- Drill holes need to be made in the Velcro plates from the GSD Clubhouse to allow bolts to extend. The first set towards the front of the bike can be used as is; additional holes need to be drilled to align with the blocks.
- Blocks should be rotated into place for a better fit, reducing rattle noise due to conformance fitting.
- A total of 6 blocks is ideal, but a minimum of 4 blocks can be used.
Printing Instructions
- Material: PCTG
- Layer Height: 0.20 mm
- Perimeter Walls: 4
- Infill: 25% gyroidal
Extras per Block
- (1) 10-24 x 2 bolt
- (2) #10 stainless steel washers
- (1) 10-24 nylon nut (or Loctite)
- Alternative to nuts: 10-24 wingnuts with stainless steel and Loctite