Liczymy pasujące modele…
I wanted to strech my knowledge of the 3D design software and I always like a nice fidget. Especially a fidget which suites 3D printing very well. These sphere can easily be printed without supports. After printing it needs a bit of…
Wydruk około 5,37 €–6,56 € nettoWstępna wycena jednego wariantu
Making is straightforward without any specials ;-) Printed mine in the picture with 0.40 nozzle, 0.20 layer, 3 perimeters, 5% infill of extrudr NX-2 PLA matte white on satin sheet.
Wydruk około 9,68 €–11,83 € nettoWstępna wycena jednego wariantu
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Make them earn their Easter candy with this egg maze container. Fun, yet not too difficult, maze to solve to open up the egg and get at what's inside. Printed in 2 pieces with 0.4mm nozzle and 0.16mm layer height. Supports optional.…
Wydruk około 5,77 €–7,05 € nettoWstępna wycena jednego wariantu
I modeled a small winter village for a lantern lit with tea lights. To create the model please follow the steps below: Print the top. This can be printed at 0.2 mm layer height with no supports. I would recommend printing in PLA at a low…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena jednego wariantu
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Put together your own little western train The 4-4-0 is an icon of railroad history. I created my own version as a tribute and based it on the shape. The somewhat comic-like variant allows you to put together your own little train. There…
Wydruk około 4,50 €–5,50 € nettoWstępna wycena jednego wariantu
I designed this coaster to use in the kitchen, under the dish-soap bottle. The pattern not only looks nice, but it also prevents the bottle will stick to the coaster. The object is optimized for 3D printing and works with a wide range of…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
When printing with 0.2 layer heights and z height at 100% (22mm) the color swaps are at 17.4mm (for base gingham color), 18.6mm (for white in gingham pattern), 19.8 (for the top pumpkin pattern lines), & 21.2mm (the stem color if…
Wydruk około 4,56 €–5,57 € nettoWstępna wycena jednego wariantu
I wanted to have a nice place for my backup hard drive on my desk. The hard drive used is the WD Elements portable external hard drive (2 TB). Just use two screws (that aren't longer than the thickness of your table) and screw it in. It…
Wydruk około 3,59 €–4,38 € nettoWstępna wycena jednego wariantu
Straight from the Green Lantern Corps. You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 90° Low speed and high temperature will create a shiny top surface. There are "holes" inside the…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Final release after more than 6 months of developing and testing! After a several month long beta process and countless improvements (especially of the auto-rewind mechanism) the complete EMMS works 100% reliable for month now. It took…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a sheet of the hoodoo hex pattern, wilI l update it with a few sizes and the parametric model when done.
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
Introduction This showcase model was designed to visually demonstrate various 3D printing infill patterns. All infill patterns were created with a consistent 10% infill density. Perfect for educational use or workshop decoration. No MMU…
Wydruk około 3,44 €–4,20 € nettoWstępna wycena jednego wariantu
3D print your very own 'Happy Jack' coaster for festive and spooky drinks this Halloween!
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
This model works great as a slide for a Cub Scouts neckerchief. The tapered passthrough snugs on the neckerchief to keep it from falling off easily. If you want it to fit more snuggly, scale the model down slightly. It's printed with…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
Gearshift pattern fit to gear lever knob which is e.g. suitable for Fendt. Printed in two steps. At first the text is printed with white filament and afterwards the rest is printed in black. Place the .stl file on the bed between the…
Wydruk około 0,03 €–0,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Kleine zarte, herzige und dezente Ohrringe für Ostern. Gemacht mit PLA in 6 verschiedenen Farben. Beim Drucken als Haftung Brim verwenden, und als Support habe ich Tree verwendet. Small, delicate, sweet and subtle earrings for Easter.…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Instead of using the standard filament holder on my Prusa Core one L, I use a Filament dryer and feed the filament directly from there into the printer via a Bowdentube. If the printer runs until the filament spool is empty, I have to…
Wydruk około 0,04 €–0,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used PETG, 20% infill (10-7% is ok), 0.20mm, 0.4 nozzle. Use 0.15mm for better results. No supports required.
Wydruk około 1,73 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The class clown intern nametag is the perfect thing to give to your classes clown. Simply give this to them and they will know what they have done. This features nice readable text so everyone walking by knows he is the clown of the…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Ho una Prusa i3 MK3S+, ho riparato il macina pepe/sale ikea
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Spooky season is coming so I decided to make some Halloween Pumpkins. This is the fourth one I decided to put on printables, but there will be more in the near future. This pumpkin is designed to be used with leaf( for extra cuteness) but…
This is a stylish hex pattern design handle that is compatible with M3, M4 and M5 bolts, and comes in 6 designs for each. The M3 version of the handle has the perfect width for 1515 extrusion, while the M4 version is ideal for 2020…
ATTENTION! THESE PIECES ARE ONLY TO BE USED BY THOSE EXPERIENCING DIFFICULTIES FITTING CERTAIN PIECES TOGETHER FROM MY ORIGINAL MASTER SWORD DESIGN! Hopefully not many of you will need these pieces, but more than a few people who have…
About Not a Key-Bak® (alternative) mount for Stealth Press 1 / 1S Made to be a less expensive retractable device alternative for Stealth Press , this is, definitely, not a Key-Bak®, but it sure works like one. Stealth Press is a highly…
Green Lantern Rings Inner diameter: 22.5 mm (0.885" according to google) No supports needed (when printed logo down) Design based on older photos from…
2d rose collection - https://www.printables.com/cs/@Ts3D/collections/1208891
guy gardner green lantern ring from the 2025 superman movie
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
lantern corps rings inspired by the dc comic series green lantern 9 rings green (willpower) yellow (fear) blue (hope) red (rage) orange (greed) indigo (compassion) violet (love) white (life) black (death) you may need to re size the ring…
I used the center oriented screw locked version of the model and removed the Elegoo text and hex background. I replaced it with the elegent Elegoo logo. Hope you all enjoy! Please note I have only remixed one of the models. Below is the…
Screw Top Lid Rugged Cylindrical Container Knurl Pattern. For the rest of the set go to: https://www.printables.com/model/641022-universal-rugged-knurling-pattern-cylindrical-cont…
I made it in the image of a traditional Japanese lantern. Necessary items in addition to 3D printer products A 60*120 piece of paper “ precisely " cut from A4 paper LED tape light Power supply Please refer to the image for how to…
Texture rolling pin for clays and epoxies. Can be used to create a pattern that's perfect for brick walls or floors. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid sticking, wet the…
I builded a 3D printer enclosure with the Ikea lack table. Finally I was not happy with the stability of the bottom one if you stack three Lack tables. So I have designed this angle bracket for improving the stability. For me it works…
This is a highly detailed sculpt of the Baron of Hell from Doom Eternal. The base model was ripped from the game and the high res detail was manually resculpted by me, based on the character's normal and albedo maps. The pose was manually…
This is the second iteration of the protractor I made some time ago. Protractor by JohnMartin | Download free STL model | Printables.com This version is made to print flat with multi-color but there is an STL to print engraved lines and…
A very small pc with internal components. The .STEP file is included if you want to create your own components for it. Print with resin for best results. The side panel is optional and can be printed with clear resin You can get a…
Internal recirculation air filtration duct for AD5X. This model use the same 24V 5015 fan/blower model as the one found on the toolhead with 4 wires. This allows PWM capability and interchangeability. The mod help reduce fumes and…
These pieces are nearly 40 cm tall and have a very small footprint. I truly have to discourage you from attempting to print these. I created these files by request. Unless you have an incredible amount of confidence in your printer's…
BOM: Printed with ROSA3D High Speed PLA Gray and Light Gray Keep your space tidy with these aesthetic, stackable organizer baskets. Designed with a stylish pattern on the side walls, they look great on a desk, in a bathroom cabinet, or on…
I made a holder for the wooden slats on the terrace.
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models of the series in this collection => [Mechanical Mechanism Examples] This set…
I have just added a new STL file called washer, this can be placed between the engine case and the handle to remove excess play. All parts are pre oriented and print with no support material. Very nice drawing to see how 2 stroke engine…
Printed in TPU, but might be ok (for a while?) in less flexible filament. Printed here with a 0.3mm nozzle @ 0.15mm layers, . Others I have printed have worked well with a 0.4mm nozzle. 21.5mm inside, 9mm tall, wall thickness 2.1mm.…
There are three different versions of this, one powered by 3x AAA batteries, one powered by a lithium battery and one with a removable base for small led candles. The lantern measures about 130x70x70mm. The assembling process of the…
Texture rolling pin for clays and epoxies. Can be used to create a pattern of hexagons. Great for miniature bases, scifi terrain, or even honey comb textures. You can run a small rod through the center to use as a handle. To avoid…
Summary This is a 3D-printable Yoshimura bloom pattern, specifically a Y-6.2 pattern (meaning it has six-fold symmetry and two rings extend out from the center). The membranes between the panels are designed to accommodate the folding…
These Japanese styled lanterns were designed as centerpieces & table numbers for a friend’s wedding. Battery powered fairy lights were placed in each lantern to illuminate them for the event. 16 centerpieces consisting of 96 individual…
Hermes is an easy to deploy external node enclosure, version 2.0 now supports the RAKWireless 19007/19003 and HeltecV3/V4 (with MPPT solar controller!). It enables you to deploy external nodes for MeshCore or Meshtastic (or others!)…
تصميم فلسطين بشكل مميز يمكن استخدامه على الحائط او في اي مكان Palestine design distinctively can be used on the wall or anywhere
Create beautiful textures effortlessly with this interchangeable clay texture roller set . This 3D printable system includes multiple pattern rollers and a comfortable handle, allowing you to quickly switch between different designs.…
By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…
An updated version of this model is now available!!! The updated version allows multiple panels to be connected together and is more flexible. You can find the updated version here: This is a chainmail fabric structure based on a Truchet…
I've had several requests for a single piece blade for my Master Sword design. This will be perfect for belt printers!
Texture rolling pin for clays and epoxies. Can be used to create a pattern similar to cracked earth like you'd see in a desert, or cracked asphalt for an urban warzone. Great for miniature bases. You can run a small rod through the center…
Here's a very not scary jack-o'-lantern candy bowl for Halloween! 🎃 I printed my jack-o'-lanterns in vase mode with standard settings except for the outer wall thickness. I changed this to 0.8mm, even with a 0.4mm nozzle, to make the bowl…
I have made a custom slim case for my external SubGHz module for Flipper Zero. There are various types of SubGHz modules for Flipper, so please check the link below or the photos to make sure it fits yours. I have printed mine using a…
I recently picked up a 14TB Western Digital Elements hard drive and noticed when placed in a vertical orientation that it wobble back and forth if I bumped my desk. This is a disaster waiting to happen. So I designed up this vertical…
It needs to be printed on SLA resin printer. FDM not tested.
These models are simple to use, but the process is hard to explain with text. Please see a tutorial in this video:
I found that the QIDI design caused jamming issues and there was a need for a filament guide. This is my attempt, set to accept a 19.75mm Bowden fitting that I had from my other 3d printer. Included as a OBJ file as it is better to export…
If you like the model, I have more 2d roses on my profile.
This solution is for who have filtraion fan taken from Prusa enclousre or Alveo3d Hepa Filter with fan, you just need to print this file, it would spend about 200g filament. If you don't have the parts either, don't mind. You could buy…
This set contains the models for the Lantern Corps rings, from DC Comicbooks. There is a file that contains all the rings, and a file for each individual ring. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: Yes…
I have recently found a few issues with this model, and have plans to redesign. Why ? What I found is that some of the filaments push back into the MMU after an unload. This causes filament to poke out into the path of the selector,…
The source file can be found from https://github.com/eamars/accuracy_international_atx_printable_parts/tree/main/thumb_rest
Original model by Brass Lantern Minis. I just removed the base for anyone who likes to do their own basing.
Texture rolling pin for clays and epoxies. Can be used to create a pattern similar to crosshatched metal for an industrial look. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid sticking,…
Just added tube stem due to wobbling. Original design by Saltygod on thingiverse
Cutting disc 6 blades for landroid with adapters - Messerscheibe landroid mit 6 Messern und Adaptern If you like it --> press like it :-) Cutting disc with up to 6 blades, holes for thread insert which will be installed with a solder iron…
Texture rolling pin for clays and epoxies. Can be used to create a pattern similar to tile with diamond inlay at ever other corner. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid…
This model is compatible with the lego system.
An enlarged scan of a porcelain boot.
NOTE: For an easy upgrade path to the STM32 Blackpill build print the Gaggiuino Component Housing and Gaggiuino Optocoupler Case (for GC) instead of this. The housing was originally designed for M2.9x6.5 self-tapping screws. These are the…
Texture rolling pin for clays and epoxies. Can be used to create a fancy tile pattern. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid sticking, wet the roller before use and avoid…
2d rose collection - https://www.printables.com/cs/@Ts3D/collections/1208891
https://www.reddit.com/r/flipperzero/comments/11s77sw/fully_unofficial_external_subghz_cc1101_module/
This model is compatible with the lego system.
This model is compatible with the lego system.
Texture rolling pin for clays and epoxies. Can be used to create a pattern of trim that would look great for miniature walls or ceilings. You can run a small rod through the center to use as a handle. To avoid sticking, wet the roller…
I made this long buffer as an alternative to the bulky buffer plates for the MMU3. It’s designed to slot in the removable pieces included in the new buffer design. For the wheel and segment construction, you can find the stls here -…
Texture rolling pin for clays and epoxies. The pattern could mimic blocky crosshatched metal, like what can sometimes be seen on a manhole cover. Great for miniature bases. You can run a small rod through the center to use as a handle. To…
GOTHIC LANTERN CATEDRAL - Candle Holder Un piccolo capolavoro che sembra uscito da una cattedrale medievale. Le sue finestre ogivali e i dettagli gotici la rendono un oggetto d’arredo affascinante e misterioso, capace di trasformare…
Custom-designed velocity stack / intake funnel for 2-stroke carburetor setups – originally developed for a Wartburg engine. Printed in flexible TPU 82A for vibration resistance and durability. The internal helical spiral guides airflow…
An ultralight Everyday Carry (EDC) utility attachment designed to slide directly onto your backpack's shoulder straps, providing a dedicated, secure anchoring point for carabiners, keys, water bottles, or pouch clips. The design features…
This is a mount that attaches to the back of your TV to allow you to mount your Xbox Series S Console. It's designed with 100mm and 75mm vesa hole patterns. Works best with 16mm M4 bolts. If installed in the correct orientation, it has…
This model is compatible with the lego system.
Just found the correct scale for a 120 count Kleenex box.
This is the Ultimate Hole-Test pattern (for M3, M4, M5 and M6 screws) Now you can print these test files and try your screws (threads + loose insert) and write down the sizes that fits the best for your printer/nozzle/filament/settings to…
This sample plate allows you to quickly compare five different Fuzzy Skin patterns and variable parameters to determine the best settings for your own designs. It's a compact LITE version of my other more comprehensive Fuzzy-Test, which…
I designed this to test my Ender 3 printer as I was seeing some strange marks in the prints. The shape was made to print in a single line and you can use it as a visual guide to see if your print bed is level. It also proved very good at…
1 version - with magnets 6x3 2 version - with screws, but without a hole for the switch 3 version - without magnets By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in…
No print support! https://www.phaetus.com/en-us/products/dxc-extruder The motor is not included as it's meant to be a drop in replacement for the Creality K1 extruder. Needs to be 12t gear (the common motor for Sherpa and Orbiter uses…
Yet another 3x shell. Unlike many versions with separate chambers, this one keeps the chambers together so you don't have inconsistent performance between darts when all the pressure escapes before every dart exits, as well as slightly…
See our other models : Concept & Inspiration: The Infinity Symbol Earrings are born from the idea of eternal beauty . Inspired by the graceful flow of the ∞ symbol, the design captures the essence of continuity, love, and balance . This…
Simple lantern. 0,12-0,2 layer, manual organics/tree support (no need supports inside!) Printed and tested on Bambu P1P. Height 40 mm Scalable.
Credit: Got the Idea from here : http://www.instructables.com/id/Lantern-Clock/?ALLSTEPS To assemble the Lanterns you'll need: 12 3x100 mm threaded rod (may be a bit to long but rather to long than to short) 3 3x20mm bolt 3 60x50x60…
