A lightweight, slide-on strap adapter to securely mount carabiners and external gear onto backpack shoulder straps.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is just a few grams to help attaching carabiners on a backpack
- Ocena
- 4,5 / 5
- Polubienia
- 160
- Pobrania
- 210
- Wydruki
- 2
- Wyświetlenia
- 2093
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
An ultralight Everyday Carry (EDC) utility attachment designed to slide directly onto your backpack's shoulder straps, providing a dedicated, secure anchoring point for carabiners, keys, water bottles, or pouch clips.
The design features integrated tiny routing holes for a small cable tie / zip-tie. This prevents the plastic mount from shifting, sliding up and down, or rattling while you walk.
How to Install:
Loosen or unthread the lower adjustment strap from your backpack's main plastic adjustment buckle.
Slide the printed carabiner attachment up onto the shoulder strap webbing to your desired height.
Thread the webbing strap back through your backpack buckle. (Using small pliers can help push or pull the strap through if the fit is tight).
Secure the mount in place using a small zip-tie through the built-in anchoring holes to prevent sliding.
Print Settings:
Layer Height: 0.2mm (Highly recommended to preserve the fine internal details for the cable tie holes).
Material: Polycarbonate (PC), PETG, or a tough Nylon blend is recommended to handle the tension and pulling force of dangling gear.
Supports: None required.