Not a Key-Bak (alternative) mount for Stealth Press 1 / 1S (heat set insert press)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Less expensive alternative for Stealth Press retractable device. This is not a Key-Bak®, but it sure works like one.
- Ocena
- 4,976 / 5
- Polubienia
- 329
- Pobrania
- 2969
- Wydruki
- 47
- Wyświetlenia
- 14 592
- Oceny
- 42
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
About Not a Key-Bak® (alternative) mount for Stealth Press 1 / 1S
Made to be a less expensive retractable device alternative for Stealth Press, this is, definitely, not a Key-Bak®, but it sure works like one.
Stealth Press is a highly precise, mostly printed DIY heat set insert tool for generic, TS100/101, and Pinecil soldering irons - download Stealth Press printend parts, see BOM and sourcing guide here.
BOM & Sourcing Guide
Self sourcing
Part | Size / Standard | QTY | Source |
M3 bolts | M3x8 SHCS | 2 | |
M3 threaded heat set inserts (M3*OD:5*L:4) | M3x5x4 | 2 | |
Retractable device (Budget savvy alternative) | 500g version | 1 |
Printed parts
Parts | QTY |
Budget savvy alternative retractable device mount for Stealth Press | 2 |
Print guidelines
Here are print guidelines for you to follow in order to have decent success with printing parts:
3d printing process | FDM (fused deposition modeling) |
Infill type | Grid, Gyroid, Honeycomb, Triangle or Cubic [1] |
Material | ASA, ASA-CF, ABS, ABS+, ABS-CF |
Infill percentage | 40% - 60% [2] |
Layer height | Recommended: 0.2mm |
Wall count | Recommended: 4 |
Solid top/bottom layers | Recommended: 5 |
Extrusion width | Forced 0.4mm |
Side notes to the print guidelines
[1] You can succeed with Support cubic infill type (slicer support may vary).
[2] As low as 25% infill for all parts if are aiming for faster print speeds and less filament usage.
PLA, PLA+, and PETG are also considerable filament choices.
A wall count of 4 is an absolute must to ensure the structural integrity of the parts. There is no need to go over the top with this. 4 walls are OK for this particular build.
How to support the project
Here are most popular choices how to do so:
Consider becoming member of Iconic FAB Club on Printables and get all Paid models and Manuals for single membership fee, starting from as low as $3.
Press like and download model files. It helps more than I can express.
Change log
Date | Changes |
15.08.2024 | Complete update to information on this page, keeping it up to date. |
24.02.2024 | Initial version |