Liczymy pasujące modele…
This model allows you to use any 1u 10 inch mounting plate as the cross member in the Labrax 10inch rack. This means a smaller printer can be used and also allows for new mounting options at both the top and bottom angled areas. Total…
I designed these inserts for the GEN2 Drawers - Large , which I remixed myself, because my drawers were always a mess. Now, after placing these inserts, everything has its proper place, and organization is at its best. The inserts come in…
I make my models for chucks and arbors for M33, with the report at the origin. To get a UNC 1"version load this model as ‘added part' in PrusaSlicer and it will fill the M33 space like a merged-in adapter. The combination will be sliced…
I wasn't satisfied with the available model for holding dremel bits and bobs in the original CD drawers files by Chris Borge. I was gifted one of those 300pc kits that comes in an unnecesarily large plastic tote and wanted to condense my…
A quick fit, 1x1 bracket allowing you to create 90° corner tile multiboards with the quick friction fit connection. Note: This uses Multiboard Tiles and thus their license also applies. Please see https://www.multiboard.io/license
Router bit insets that fits the honeycomb wall by RostaP Print with the bottom down and use a brim I printed mine in 0.20 PLA PETG should work just fine
This is a 3d model of motor mount inserts for the 92-95 Honda Civic EG/ 93-97 Del Sol (They also work with B series swaps). These stiffen the stock motor mounts for those making more power with turbos and such. They slide into the stock…
I made this for a shelf I use a lot. Helps to organize smaller things and maximize space. It's for https://www.thingiverse.com/thing:2110961/makes which is an incredible shelf with no love on thingiverse
Festool Sander base for custom Systainer inserts. Fits the ETS-125, RTS-400, and DTS-400, all of which have the same body. Created by scanning an original Systainer insert and then modeling around it with F360 forms and surfaces. The…
Better Organize your Akro-Mils 10144 44-Drawer Storage Cabinet. Allows you to have more parts in the Bin.…
The ball vice I made results from remixing three models: Open Ball V1 (Ball vise system) , D-Series Ball Vise and D-series Dovetail Vises . Credit goes to Chris Borge for the original designs, Chris Deeter for his very helpful Build Guide…
The ball vice I made results from remixing three models: Open Ball V1 (Ball vise system) , D-Series Ball Vise and D-series Dovetail Vises . Credit goes to Chris Borge for the original designs, Chris Deeter for his very helpful Build Guide…
Parts needed: A Heltec LoRa 32 V3 board 2x M3x14 bolts 2x M3 nuts
This is a collection of inserts for my EDDC boxes. Regarding your needs you can fit the right insert to sort and organize your dice or miniatures and keep them protected. Plus a template to cut liners for the inside of the box. Find the…
Error 17536 relates to an issue with the Dwarf Board connector and the original design of the cable strain relief. The strain on the connector can cause the extruder motor to stop spinning and until a recent beta firmware (6.2-RC1) the…
Summary: These are custom inserts for the Pinecil rugged case. I remixed some models from other users to better fit my needs. Hardware Notes: The brass and wet sponge cover will require M2 screws and the respective heat set inserts to…
Powerbox Systems offers a softbag for their Core/Atom radio transmitters. The softbag has a foam insert with a number of recesses in which smaller accessories can be stored. The inserts provided here fit exactly into these recesses and…
🎁 Get $100(s) in Rivian Rewards points and 3 months free RAN charging by using my referral code TODD11893313 when 🛒 ordering a Rivian . Updates Feb 19, 2026 Added new medium size to match new cup size. Cup Holder Inserts These are solid…
can can put inserts into doors from the inside, especially if you messed up bridging and dont want to reprint doors again. :) Mercenary landy kit is on Cults
This is a 3D-printable enclosure designed to house a Victron2MQTT PCB and a Wemos D1. The case consists of two parts: a bottom housing and a snap-on top cover. The design includes ventilation slots for heat dissipation and mounting…
This allows for the rugged box to hold 3mL peptide vials or 10mL (22mm) vials.
FLSun Super Racer - HGX Lite Housing / Mount (no inserts)
There is a conical hole in the upper part of the insert so that the screwdriver can be easily inserted into the holder. The diameter of the hole for the screwdriver is 11 mm.
A Tunnel Front Sight for olimpic shooting, with a Ruger American Rimfire adapter (you can change the curvature for other muzzler) with a 12-38 insert sample.
Tipps and values: Filament: PLA recommended (PETG also works) Quality (Layer Height): 0,2mm Wall Loops: 3 Infill: 20% Infill pattern: Doesn't matter (I used Rectilinear) Supports: No! (Do not use supports for all of my Parts!) Wall…
This model was remixed to accommodate an Eddy Duo inductive sensor as part of a broader retrofit of the CR-10S to a Manta M5P control board. The components shown were printed in PLA+ for prototyping, though the final version of the main…
Our RV couch has cup holders that don't work with small cups and glasses, as they have an odd recess. I designed these to allow smaller cups and to eliminate the narrow recess at the bottom of the standard cup holders. Can be installed as…
For assembly instructions see the original upload https://www.printables.com/model/31558-big-einsy-case Instead of the nuts and square nuts you will need 10x M3 inserts Hole diameter for insert is 4mm. I modified both the original and a…
This is a gridfinity bin that holds heat inserts and bolts. Heat inserts used
I build these Aeons End board game inserts using Tinkercad and I'm a beginner. I may have to remix at some point, but these work great for the basic game and one expansion (separate board game). The scoring discs holder can hold at least…
Zero clearance inserts for Bosch PCM 8S sliding mitre saw. Inserts are intended to use only when saw is in vertical position, for other angles please use original inserts. For dimensions please see diagram, printer with table at least…
Another remix of the inset for the "Precision screwdriver case" by TimATX
The buttons of our Novy extractor hood got stuck and were unusable. The intermediate plastic part linking the button to the actual PCB button broke / wore down. This piece replaces the intermediate part. Print 1 for each button.
📦 Prusa Tool Box Inserts – Secure Sorter 🧰 Keep your Prusa accessories organized and secure! These two custom inserts are made for the Prusa Tool Box V2 , compatible with MK4S, MK4, XL, MK3.9, MK3.5, MK3, Mini+, and Mini printers. They…
Quick model of stake and baseplate options for LED flood lights. We use these lights for holiday displays.Quick model of stake and baseplate options for LED flood lights. We use these lights for holiday displays. Always been a pain in the…
I like this size of boxes. You can fit a lot of them on shelves to use the depth of the shelves efficently. To organize the inside of the boxes there is only one size of inserts so I made a parametric model to use as much of the volume…
made the holes for the m3 screws bigger to use a m3 heat insert instead of printed thread
We use 5l Samla bins for the kids Legos, but to be better able to sort them into different colors and types I created inserts so you can subdivide one bin into half or quarter bins. The bins have a grip so they're easy to pull out and…
I designed this model considering easy use of multimaterial painting, in case you want to print the logo and text in a contrasting color to the case. Printed in PETG with 0,25mm nozzle (recommended for clear and sharp contour of the logo…
This Hacksaw Handle (no inserts) is one of several versions of my popular Hacksaw Blade Handle. This version doesn't require heat-set brass inserts or a soldering iron to install them. Instead, the female threads are printed in the handle…
These custom foot inserts keep my Creality K1c locked in place during prints. Mount them to the table with screws or adhesive tape, then position the printer directly on top.
This is a replacement insert for the Sidchrome tool sets shown. It will likely not fit other eras than those shown, as some of the individual tools changed dimensions frequently over the years. Found these files useful? Buy me a coffee !…
The model is inspired by the Vertical Drill Guide for Forstner Bits . I use various drills and didn't want to print many drill jigs. Thus I came up with the idea to use inserts with different diameters and heights. The design is - to my…
This Hacksaw Handle With Guard (no inserts) is one of several versions of my popular Hacksaw Blade Handle. This version features a slip-guard band and finger grip bumps , and it doesn't require heat-set brass inserts or a soldering iron…
Improved the standoffs and made the holes bigger to account for the larger diameter of the inserts. Also increased the diameter of the standoffs to make the walls more stable. Also made another one with two 10x3mm magnets. That one I…
The hole is 3.7mm wide by 4.6mm deep. Make sure your inserts are about 1mm wider than the hole (so there's plastic to grip) and not as deep.
I made these inserts for some jars i bought from Claes Ohlson as they only came with very small 3mm holes that didn't work with some herbs and spices. I'm sure the same jars are sold under different names so maybe they may be of use to…
I recently put HSW on my ceiling to hold some lights, and took the opportunity to expand my ever-growing Honeycomb Storage Wall library for Onshape . Rather than a "one size fits all" approach like some of the existing HSW zip-tie…
A bowl for screws with some 7mm x 7mm x 3.5mm holes in the bottom which each fit 2 chromebook lid magnets (6mm x 3mm) pretty nicely with a spot of super glue. Print Settings: >50% infill no raft, if you do a brim make sure it's on the…
This is my version of Dereki22's Gridfinity Base with Honeycomb Inserts. Based on RostaP's Honeycomb storage wall and RIP_Plo-Koon's Gridfinity Magnet Light Baseplate, I have created a minimalist and well-fitting alternative.
1U 10" Rack Spacer with HoneyComb Inserts Compatible with: Raspberry Pi 5 Case
This inserts is for the Milwaukee sockets, 1/2 Impact and 5.0 Battery. ✅ COMPATIBILITY Sockets Supported 1/2” Drive SHOCKWAVE Impact-Duty Metric: 10mm – 24mm SAE: 3/8” – 1-1/2” Designed for Milwaukee deep-well sockets Tool Compatibility…
Background: This is a Gridfinity baseplate that fits into the standard depth and deep toolboxes made by Craftsman (Versastack Model No. CMST17830 & Model No. CMST17825) and DeWalt (TSTAK Model No. DWST17807 & Model No. DWST17806). The…
All files in print orientation Multicolor Inserts: Only for the inserts I included Transparent filament until 0.5mm Filament change at 0.5mm to the reticle color For the other parts, go to: No hardware:…
I have had an excellent Proxxon socket set for a very long time, but the plastic insert inside the metal toolbox has seen better days and is a bit too large to fit into my preferred workshop storage - Milwaukee Packout Draw units. These…
Multiboard trays in four sizes , all with 30 mm height and 80 mm depth, in the following widths: 150 mm, 200 mm, 250 mm, and 300 mm. Trays are slightly reduced in width to allow them to be placed side by side Inserts are also available,…
Pulled the wings off the original model and added an insert after scaling up and recoloring so they could work as props on a small 6 inch cake
Long star handles for M6 and M8 inserts. The handles are 75 mm long.
Custom Size box with tight Fit Lid also has Heat Inserts for screws. Can customize size of the box for any size you want. Design is very durable and robust. can use for electronic applications or general purpose applications . you can…
Inserts for Ashes: Rise of the Phoenixborn (2015 - first edition) These can help organize sleeved cards for all extensions published in french (The Frostdale Giants, The Children of Blackcloud, The Song of Soaksend, The Roaring Rose, The…
Instead of using supports, I took a technique from Angus (MakersMuse https://www.youtube.com/watch?v=RPijCjz9G1w ) and added eight 0.2mm thick cylinders. Each located at a step overhang in the screw holes (2 per hole). This allows the…
I wanted to give my enclosure a clean look, so I made these up to fit into the recessed AD5X logo on the printer's enclosure. These fit nicely, and only stick out a little as they are only 1mm thick. Just print, apply a tiny amount of…
I created part label inserts for the Parts Tray Drawers so it would be more obvious what is in each box. Each insert has a little handle in the middle to make removing the insert easier. The inserts are a tight fit in some of the bays in…
I could not find (free) inserts for this version of the Santorini board game. Check the pictures if you have the same version (second edition). Consists of trays for all the game pieces to replace the plastic bags. I think it is a neat…
Drawer inserts for Simply Tidy 10 drawer cart purchased from Michaels store in U.S. 3 sizes. Test Prints in PETG., 0.4 nozzle. 0.3 layer height Design on tinkercad, link below.…
Gridfinity box storage inserts for 65mm tiny whoop(hummingbirdv4). inserts are sized to 36mm gridfinity. They will not work with 42mm(standard). Designed to go with a modified version of a gridfinity box made by @PaulMostioru_1755420.…
Eye inserts with star-shaped pupils for many uses! I made these on Tinkercad in early 2025 as a practice design. I don't really like them, but I hope they serve some purpose. :) I am now taking requests for 3D designs. I may or may not…
These inserts work with Makita's original 50x50mm boxes (SKU: 191x93-3) Link: Makita MAKPAC Interlocking Organizer with Inserts, model number 191X80-2 Makita 191X93-3 Makpac Organizer Inner Box, 50 mm Length x 50 mm Width
This is somewhat of a storehouse for Bisley drawer organiser designs for jewellers' use. Model 3 is a drawer insert for the 2" drawer that has numerous slots for 5-piece bur cases, a section of 2.35mm slots for individual burs, a longer…
This is a remix of the Octopus Pro Mount for DIN Rail Bracket & Fan Mount. I made the fanholes 4mm wide and the body 6mm thick so I could use my M3 Ruthex threaded inserts. The fans I've mounted on the top so I could use M3x40mm screws. I…
As I so often do, I went looking for something I need on all the usual STL sites, but to my great surprise, I couldn't find replacement pads for my ChannelLock Soft Jaws (415SJ)... sure, I found soft jaw attachments for regular…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) SETIM & SETAM ORGANIZER…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) BETIM & BETAM ORGANIZER…
The plastic brick companies do not make a full range of window glass and inserts like lattice in the same colors. Very frustrating especially if trying to replicate a specific building. Only a few of these have been test printed - at…
These are some Inserts for the Dewalt TSTAK Drawers, they sit inside the drawer sections allowing you to put smaller items in, they have lids as well to stop spillage when you carry the drawers on their side. There are options: - Single…
Stackable Dual-Cork Coasters (100mm Inserts) These coasters use two cork inserts : one on top to hold your drink and absorb condensation, and one on the bottom to prevent slipping on the table. The result is a coaster that grips from both…
Since Games Workshop miniatures tend to be spindly and fragile these days, I wanted to add magnets to the bottoms and sheet metal to storage boxes to keep the miniatures safe. These inserts work around the various features underneath the…
Just made the inserts so you dont need to glue them, just push them in the hole.
The T- and X-Inserts will fit the Keter® CaddyXL organizers. I do not know if these inserts will fit the CaddyL organizers as well. The X-insert fits into one square space. For optimal stability, place a small piece of double-sided tape…
After printing Josh-3D 's awesome Blood Rage organizer , I didn't like that all the player pieces were just tossed into one box.. This remix / addition adds individual player boxes that fit within the player piece tray (…
a little catch all tray with an interlocking system for little items, perfect for paints or paper clips etc. easily scalable if you select all and scale down!
I use these Needle File Handles https://www.printables.com/model/387677-customisable-needle-file-handles I needed an insert to make them fit the file rack corectly so I made these inserts. I also included a long cup insert for holding…
Hello all! These are my custom inserts for Quacks Deluxe. Will not fit any other version to my knowledge. Number to print of each file is marked on the files themselves. I recommend 10-15% infill and 2-3 walls. Other than that have fun!
The organizer only has 8 dividers, but it has 12 separation points. This allows me to use all of the compartments. Update1: Added some new insert for bolts and drills.
About These 2, 3, and 4 compartment dividers sit inside the drawers of a commercially available organiser. The organiser I purchased from Amazon UK is called "simpa 60 Multi Drawers Plastic DIY Tool Bit Storage Organiser Cabinet", but the…
Carcassone kids tabletop game inserts. There are 2 different inserts provided: carcassone-kids-insert - space for stack of game cards and figures/meeple, carcassone-kids-figure-insert - 4 separate compartments for figures/meeple to for…
simple stencil created from vector art, printed in two halves, with cellophane glued between to create the appearance of stained glass.
This model provides custom replacement inserts for the Bachmaier Fidelity ear plugs, available in two functional variants: Included Versions Solid insert Offers slightly stronger damping than the original strong membrane insert (probably…
🏁 Experimental Parametric TPU Tire Inserts – The Future of RC Traction Tired of foam inserts getting soaked, rotting, or developing flat spots? This experimental project brings a 3D-printed solution for the entire RC community. Whether…
I got a bunch of these 6.5qt hdx bins on sale a while back and found myself throwing all sorts of things in them. That was great to get everything off my desk and seem a little more organized, but then it was more of a pain to find the…
System for storing 150mm sandpaper disc's in a SYS3 237. The bottom is the bott/tanos/sys3 org bottom. Printed in 4 parts with connectors. The boxes are 2x7, 3x7, 4x7 and 5x7 in size. The bottom grid needs support under the cross in the…
Modeled after the Blue Oblong Pen from the game Disco Elysium. Borrowed forever from Kim Kitsuragi. Pilfered an ink insert from a Pilot G2 pen, which works well. Other inserts may work (You don't need to print the ink insert, it is just…
A quick remix to swap the wood screws for M3 screws and Threaded Inserts, otherwise exactly the same. Requires: 4x M3 8mm threaded inserts 2x M3x14mm bolts (for the shallow bit) 2x M3x16mm bolts (for the high bit) You still need the lock,…
A micro wedge for the smallest sanding operations (miniatures in my case). Needs: - 1 m3 heated insert (4mm outer diameter, 4mm length) - 1 m3 screw (13mm length) - Many sandpaper strips (1cmx7.5cm)
Revision Log 2026-02-25 -- Initial Release BOM: Qty 8 - M3 Brass Inserts Qty 6 - M3 x 16 Socket Head Cap Screws Print Settings: Material Used: Inland (Micro Center) PETG-CF I just followed the Voron spec for this one: Use PETG-CF or…
Custom Inserts for the Milwaukee Packout Organizer (48-22-8430) to store Milwaukee Gen2 High Torque Impact and Harbor Freight Impact Sockets. Once printed, you will have to cut part of the packout "middle" wall to accomodate the anvil of…
Printed on a CoreXY out of PLA+ standing up vertically at very slow speeds, ballpark 10-40mm/s to prevent being knocked over. If you continue to encounter failures consider using a brim. Bedslinger friends will probably want to go very…
