Gridfinity Kitchen Knife Inserts and Silverware Divided Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom boxes for your kitchen drawers.
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 3425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I made these boxes for my own drawers based on my kitchen utensils, specially the knifes that I modeled to fit my specific set of knifes (Brand: Tramontina).
As a starting point I generated the gridfinity boxes using an onshape template and modeled the inserts on top of it.
This is my onshape link in case you wanna customize the knife inserts to fit your needs:
I'm including the grids I made for my drawers in case there's anybody out there with the same drawer size (W:185mm x L:475mm).
Printed all in 10% infill and 0.2 layer height. If you don't have a big print bed, there's also a gcode for the knife box sliced into 2 parts.
Have fun and feel free to modify these parts to better fit your needs! :)