1 / 5
CORE One / CORE One L Z-Motor Mount with Heat Set Inserts — zdjęcie 1
1 / 5

CORE One / CORE One L Z-Motor Mount with Heat Set Inserts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Improved Z-motor mount for Prusa CORE One with heat set inserts for reliable, strip-proof mounting to base plate.

Ocena
5 / 5
Polubienia
181
Pobrania
6752
Wydruki
22
Wyświetlenia
13 313
Oceny
21

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

This is a remix of the Z-motor mount for the Prusa CORE One 🥰. The key improvement is the addition of heat set threaded inserts in place of the original design that required the M3 bolts to thread directly into the printed plastic.

Key Features:

  • Heat Set Inserts: Eliminates the risk of stripping threads when mounting to the base plate

  • Reliable Installation: Risk-free initial mounting process

  • Maintenance-Friendly: Easy and safe remounting during printer maintenance

  • Enhanced Durability: Heat set inserts provide stronger, more reliable connections than plastic threads

  • Drop-in Replacement: Compatible with existing CORE One assembly process

New versions of the kits ship with injection molded Z-Motor mounts that come without a separate clear spacer part. You can still use this model, just print the optional spacer part that is in the files section.

Assembly


👉 Heat Set Insert Placement:

The heat-setting insert sits 0.8 mm below the base surface. This ensures a safe distance from the stepper motors at all times.

Therefore, make sure it is fully seated before proceeding.


Post Processing

  • Remove all support material and inspect the print quality

  • Gently sand the top surface using sandpaper on a flat surface to ensure the mount sits perfectly flat against the base plate when doing the final assembly

  • Install the heat set inserts , ensuring they are completely seated (refer to included images)

 

Threading Preparation:

The M3 screw hole is intentionally slightly undersized to create a secure thread that prevents loosening over time. To achieve the perfect fit:

  1. Insert an M3 x 8mm screw from the underside, threading it all the way through

  2. This creates a perfectly aligned thread in the plastic that matches the heat set insert

  3. Remove the screw and mount the motor to the mount

Final Assembly:

  1. When mounting the unit to the base plate, ensure the M3 screw aligns with the thread created in the plastic

  2. For added security, consider using blue thread locker (Loctite) if desired

Note: The undersized hole design provides mechanical thread locking, but the fit will  of course depend on your printer/filament settings. For added security, consider using blue thread locker (Loctite).

Print Settings

  • Filament: PC (… and one 25g sample of Prusament PC Blend is all you need for the 3 mounts)

  • Layer Height: 0.2

  • Extrusion Width: 0.4

  • Perimeters: 4

  • Top / Bottom Layers: 5

  • Infill: 60 %

  • Support: Recommended (see instructions below)



Printing Notes:

To eliminate any risk of imperfections in the heat set insert areas, it is recommended to use supports for the overhang areas (highlighted in red).

CAD

This model has been completely reverse-engineered from the original Prusa design, allowing for full customization and modification. Complete CAD data is provided in the download section, including both .STEP and native Fusion format. 

BOM

  • 12 x M3x5x4 Heat Set Insert (Voron Spec)

Tagi