Multi-Use Case with Inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,86 € – 1,06 € netto (bez VAT)
Dla pliku: Lid_0.2mm_PLA_MINI_1h0m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,96 € netto (środek widełek).
- Masa podana przez autora
- 11 g
- Czas druku podany przez autora
- 1,01 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A small, heavy duty case with a collection of inserts for different uses
- Ocena
- 4,921 / 5
- Polubienia
- 6701
- Pobrania
- 16 507
- Wydruki
- 391
- Wyświetlenia
- 94 461
- Oceny
- 330
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
A small, strong case with a collection of optional inserts for different uses.
Case
Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.
This can be a standalone case or you can add inserts for more functionality. As requested, I have included the following lids with text to label the contents of your case:
- Blank Lid (default and easiest to print)
- AA Lid
- AAA Lid
- 9V Lid
- Digital Media Lid
- Nozzle Lid
Print Settings
Base and Lid can be printed with 3 perimeters and 0% infill. Using these settings, most walls will be solid. The combined print time was just over 3 hours for me.
Optional Inserts
- Battery Holders
- AA Holder - fits up to 6 AA batteries
- AAA Holder - Version 1 fits up to 6 AAA batteries, Version 2 (currently untested) holds up to 8 batteries
- 9V Holder - fits up to 2 9V batteries
- Digital Storage Holders - Can be used together or separately
- MicroSD Card Holder - fits up to 12 MicroSD cards in the lower section
- SD Card Holder - fits up to 6 SD cards in the upper section
- Dividers
- Full Divider - Splits the entire case into 2 compartments
- Upper Divider - adds 2 compartments on top - Can be used with the Lower Divider
- Lower Divider - adds 2 compartments on bottom - Can be used with the Upper Divider
- Nozzle Holders - Can be used together or separately
- Upper Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)
- Lower Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)
Print Settings
No special print settings are needed for any of the inserts. I used 2 perimeters and 10% infill. Print times range from 35 minutes to 2 hours, depending on which insert(s) you choose to use.
More inserts from other users can be found here.
The following filaments were used in the pictures above:
Black Case
- polymaker PolyTerra Charcoal PLA
- Hatchbox Sparkle Gray PLA
Red Case
- polymaker PolyTerra Army Red PLA
- polymaker PolyTerra Lava Red PLA
Yellow Case
- PrintBed Yellow PLA
- polymaker PolyTerra Banana PLA
Teal Case
- polymaker PolyTerra Arctic Teal PLA
- PrintBed Baja Blue PLA
Purple Case
- Prusament Galaxy Purple PLA
- Fillamentum Lilac PLA
Orange Case
- CC3D Flame Orange PLA+
- Inland Orange PLA
Green Case
- PrintBed Green PLA
- polymaker PolyTerra Forest Green PLA
Blue Case
- GIANTARM Matte Navy Blue PLA
- polymaker PolyTerra Sapphire Blue PLA