Multi-Use Case with Inserts
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.86 – €1.06 net (excluding VAT)
For file: Lid_0.2mm_PLA_MINI_1h0m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.96 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.01 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A small, heavy duty case with a collection of inserts for different uses
- Rating
- 4.921 / 5
- Likes
- 6,701
- Downloads
- 16,507
- Makes
- 391
- Views
- 94,461
- Reviews
- 330
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
A small, strong case with a collection of optional inserts for different uses.
Case
Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.
This can be a standalone case or you can add inserts for more functionality. As requested, I have included the following lids with text to label the contents of your case:
- Blank Lid (default and easiest to print)
- AA Lid
- AAA Lid
- 9V Lid
- Digital Media Lid
- Nozzle Lid
Print Settings
Base and Lid can be printed with 3 perimeters and 0% infill. Using these settings, most walls will be solid. The combined print time was just over 3 hours for me.
Optional Inserts
- Battery Holders
- AA Holder - fits up to 6 AA batteries
- AAA Holder - Version 1 fits up to 6 AAA batteries, Version 2 (currently untested) holds up to 8 batteries
- 9V Holder - fits up to 2 9V batteries
- Digital Storage Holders - Can be used together or separately
- MicroSD Card Holder - fits up to 12 MicroSD cards in the lower section
- SD Card Holder - fits up to 6 SD cards in the upper section
- Dividers
- Full Divider - Splits the entire case into 2 compartments
- Upper Divider - adds 2 compartments on top - Can be used with the Lower Divider
- Lower Divider - adds 2 compartments on bottom - Can be used with the Upper Divider
- Nozzle Holders - Can be used together or separately
- Upper Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)
- Lower Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)
Print Settings
No special print settings are needed for any of the inserts. I used 2 perimeters and 10% infill. Print times range from 35 minutes to 2 hours, depending on which insert(s) you choose to use.
More inserts from other users can be found here.
The following filaments were used in the pictures above:
Black Case
- polymaker PolyTerra Charcoal PLA
- Hatchbox Sparkle Gray PLA
Red Case
- polymaker PolyTerra Army Red PLA
- polymaker PolyTerra Lava Red PLA
Yellow Case
- PrintBed Yellow PLA
- polymaker PolyTerra Banana PLA
Teal Case
- polymaker PolyTerra Arctic Teal PLA
- PrintBed Baja Blue PLA
Purple Case
- Prusament Galaxy Purple PLA
- Fillamentum Lilac PLA
Orange Case
- CC3D Flame Orange PLA+
- Inland Orange PLA
Green Case
- PrintBed Green PLA
- polymaker PolyTerra Forest Green PLA
Blue Case
- GIANTARM Matte Navy Blue PLA
- polymaker PolyTerra Sapphire Blue PLA