Counting matching models…
A set of battery boxes to store AA, AAA, C, D, PP3 (6F22) and 23A batteries. You can print one size at a time and I've included the .3mf and GCODE files for the Prusa i3 MK3/S using PETG which is a great material for these boxes. Also…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
EN: Box for 2 battery AAA size - model is in two versions (for parallel or serial connection). Print without supports. The electrical part needs: - 2 pieces anode battery contact AA/AAA type 228 (12x12x0.3 mm) - 2 pieces cathode battery…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
This is fridge or stand alone organizer for 24 pcs of AAA batteries and 25 pcs of AA bateries. It is ready for instalation 6 pcs of 20x5 neodymium magnets. NO SUPPORTS NEEDED!!!! Magnets are available here:…
Print approx. €27.12–€33.15 excl. taxPreliminary estimate for one variant
This is a battery holder that looks like the Great Wall of China . It can carry AAA Batteries; when you take one from the dispensing area, another battery will roll down to take its spot. You can use this to organize AAA batteries that…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for PETGSource material: PET
I have a bunch of Panasonic Eneloop AAA batteries and I've learned that they're slightly wider than a standard AA battery. As a result, I figured I'd go ahead and design my own #gridfinity container. I was able to modify Jamie's OpenSCAD…
Click here for 3hatch type / 4batteries included https://www.printables.com/model/315831-missile-pod-style-battery-holder-aaaaa-3hatch-type Click here for the improved Version 2.0 with easier assembly, pre-configured 3MF profiles, and…
If you are looking for bigger cases for 12 Batteries, you can find them here: https://www.printables.com/de/model/382489-battery-cases-for-12-aa-or-12-aaa-batteries-with-s Update 18.4.21: Added STLs for the lids without the AA/AAA Labels.…
Gridfinity Battery Holder Lids –use them with your favourite 1x2 Gridfinity stacking containers , or use the included containers. No need to print out an entire container to hold a few batteries, these lids lock on to the stacking lip and…
Simple Cases for AA and AAA batteries. If you are looking for smaller cases for only 4 Batteries, you can find them here: https://www.printables.com/de/model/382491-battery-cases-for-4-aa-or-4-aaa-batteries-with-scr Print Settings Rafts:…
another remake but now with 9V also. need some supports printed in 0,2 PLA Standard
-– == Update 06/37/2023 == – You may need to adjust x-y scale by +-/1-2% to account for the variation of battery sizes. I have printed 30+ holders and only had to do this one or two times. –-== Original image ==-- -- == Vase-mode battery…
This is a remix of AA and AAA battery dispenser to be used on your multiboard organizer wall Category: 3D Printing
I got tired and frustrated after printing other dispenser designs and having them jam after only a few batteries were dispensed. So I came up with this jam-free design and it really works well and will hold 39 batteries. If you lay the…
2x1 Grid Battery Bins Gridfinity refined compatible. 12 AA ( + 2 AAA) or 26 AAA can be stored on 2x1 grid. The AA bin has bonus 2 AAA slots. Optional lids are provided. They are best printed with transparent filament. Then, you can count…
Hier findet ihr eine Aufbewahrungskiste für zwölf Batterien der Größe AA. Die Kiste ist stapelbar und kompatibel mit meiner Kiste für die AA-Batterien. Am besten mit organischen Stützen drucken.…
Distributeur de piles / accus / batteries. Prévu pour être posé, il est stable grâce à son pied arrière. S'imprime en une seule pièce, sans support. Fichier paramétrique f3d (Autodesk Fusion) pour modifier les dimensions des batteries, le…
Battery Holder AAA is a remix of "Stackable Battery Holder AAA nojam, fits on AA-sized holder" by 7eggert (thingiverse.com/thing:3331733). Changes: Base tip slightly extended to hold batteries better in place Base ramp slightly stabilized…
So, when the bin you've been using for the last several years gets tossed because it was empty and batteries no longer come in plastic containers anymore you need to solve the problem as you don't want to change your habits. Result: I…
Your own €€ Special Start Site, Affiliate, Ebay Watcher, TV, RSS Forum, Organizer ....... https://www.klamm.de/user/michardt-49882.html For Contact [email protected] https://www.printables.com/social/295594-palamut0815…
Uses M4 x 4mm Print with no support, brim would be good but not necessary. Put the M4 in the print (self tap) and slides it in the battery, might be a little loose or tight(depends on your battery dimension and print settings). But after…
AA & AAA Battery Dispenser for Multiboard A simple dispenser for AA and AAA batteries that clips onto the Multiboard. Drop batteries in from the top, pull the next one out from the bottom (to the side). FIFO. Can hold 12 AA and 13 AAA…
This model is inspired by https://www.thingiverse.com/thing:456900 . It is made to be 7.4 mm narrower than the original, saving precious space in your models. That is achieved by thinning the walls between the batteries down to 1 mm…
Look in https://www.printables.com/social/261776-brass_ring/collections/224415 for other sizes. These battery boxes are printed as separate parts that are printed in orientations chosen to maximize strength and then snapped together. The…
This model allows you to print a battery pack for your AA/AAA batteries connecting the batteries in series with aluminum
Battery crates with branded designs. The design plates need to be glued to the original model. For the multicolor looks i just paused mid-print and changed the filament color. The crate can be obtained on printables or thingiverse. I…
Some simple triple AAA battery holders
Avec réutilisation de vieux ressort d'une télécommande par exemple ! Éviter les supports, privilégier l'impression sur le bas, ne pas mettre de support, sinon les trous pour laisser passer les tiges des ressorts sera obstrué
If you just want to attach it directly to a wall, use these attachment points . Use as many as you want, minimum 2. Space them out at any interval of 25mm. This battery dispenser features an S-shaped magazine to reduce jamming risk.…
Simple, shallow, 2x2 Gridfinity AAA battery holder - holds 36
These are very simple, undecorated plain containers for AA and AAA cells. Placed side by side on the slicer you can possibly merge 2 or more to create larger units. Designed to be very economical on plastic and quick to print.
i know, it looks like the UK flag. not intentional.
max 0.2 layer height, smaller might be better if you can though needs supports
AA - The assembly will require 5 screws M3x15, M3x20. AAA - The assembly will require 6 screws M3x15, M3x20. If desired, it can be glued together. The model is designed for printing with PLA, PET-G, and plastic.
I've made a slim compact travel AA & AAA battery holder, so I never get stuck with a dead wireless keyboard and mouse at the office. You can keep it at your desk, or in your backpack. Neater than let them loose or in the blister. Made it…
Had a spot to store some rechargeable batteries, this fits the space. Stores 17 AA's and 9 AAA's in a wall mounted holder. Overall size of 251mm x 44mm x 24mm. Also included copy of "holes" used in the print to add more if desired.
Battery holder for 28 AA batteries and 9 AAA batteries placed into the AliExpress plastic case. Successfully printed with the following settings: Material: PETG Layer Height: 0.15mm Infill: 15% Supports: None Case 125x105x73mm:…
Update 08.11.25 : Added CR2450 - Thanks for you Feedback @Oliver_655161 Update 26.05.25 : Added LIR2032 - Thanks for you Feedback @Knocks_3289771 ______________________________________________________________________________________…
Really the same as the original but support for AAA size. V2 - Clean up, Rounded corners
Recycling bin for AA and AAA batteries (MMU) khaki green white
max 0.2 layer height, smaller might be better if you can though needs supports
aaa battery holder for 158 batterys, will fitt in the bigger tayg boxes.
Simple flat case to hold six (6) AAA Batteries. I printed in PETG for outdoor use, but TPU works as well. Please post your Likes & Makes if you like the design. Power on! My AA Battery case can be found at:
This flashlight diffuser transforms your flashlight into a versatile colored light source. Simply insert a small plastic sheet of your desired color into the diffuser, and your flashlight beam will be filtered to match. This download…
Print on its side, so the clips look like C's on your bed. I recommend not using PLA for this print, creep will quickly make it useless. Works well wall mounted (use two sided tape) or in a drawer to keep your batteries organized. I use…
TEM ID: BLM-PWR-AAA20500 CLASS: Energy Transmutation Device GENERATION: Post-Steam Revival Mk.I MAKER: Black-Lotos9758 Energy Artifact: “AAA→20500 Converter” ⚙ PURPOSE Energy rebirth. The artifact allows you to use an analogue of 20500…
Maglite Mini 2 x AAA flashlight holder using magnet or command strips or screw. Magnet print sized for a "25lb Magnetic Hook" replace the hook with a M4 x 8mm screw and washer. Includes versions for mounting with two poster command strips…
added C battery model 2026-03-31 Assembly is easy, but to keep the part simple to print when you put the two pieces together some sort of glue is recommended. I used two drops of superglue in the corners to hold the Ramp and Frame in…
Stand for cheap thermometer / hygrometer that replaces LR44 batteries with single AAA battery as power source. Thermometer / hygrometer module can be bought on aliexpress, amazon etc. Variant with and without sensor mounted on the cable…
Update 2/16/26: For AAA batteries, change the battery_diameter parameter to 10.8 mm and the hei to 46.5 mm Update 1/4/26: Fixed the hinge problem Change the b_x and b_y parameters to change the number of batteries
Update on Jan 25, 2026: Partial Height Bins are now available for CR2 & CR123A batteries. AA and AAA bins have also been revised to have an additional compartment. High-capacity bins have also been added. Gridfinity Stackable Storage for…
Quick Lock AA & AAA Battery Travel Case Stop carrying multiple containers for different battery sizes. This Quick Lock Case is a precision-engineered storage solution that securely holds 2x AA and 2x AAA batteries in a single, compact…
I made a simple interlocking battery organizer for one of my drawers. The trays are 156mm wide (6.14 in).
Distributeur de piles / accus / batteries. Prévu pour être posé, il est stable grâce à son pied arrière. S'imprime en une seule pièce, sans support. Fichier paramétrique f3d (Autodesk Fusion) pour modifier les dimensions des batteries, le…
Gridfinity battery holder AA (2x3) and AAA (2x2) Height: 5U AA (2x3) holds 24 batteries AAA (2x2) holds 16 or 25 batteries Designed in Freecad
A short, compact battery holder that fits perfectly into cabinetry shelving 155 mm deep (or wide, depending on your angle). Remixed from the great design by @StefanoUngar_1469270 . It fits Costco 48-pack batteries and I figured making it…
Simple, shallow, 2x2 Gridfinity AAA battery holder - holds 36
AAA battery organizer in the form of a box with a lid for 35 batteries. Check out my other models. Organizer na baterie AAA w kształcie skrzynki z pokrywką. Pomieści 35 sztuk. Sprawdź inne moje modele.
This is an case for 4 AAA batteries, without contacts, but maybe you have those metal plates with a spring on it ;)
So, when the bin you've been using for the last several years gets tossed because it was empty and batteries no longer come in plastic containers anymore you need to solve the problem as you don't want to change your habits. Result: I…
Zásobník a dávkovač baterií AA / AAA (Gravity Dispenser) Už žádné poházené baterie v šuplíku! Tento model je praktický gravitační dávkovač , který udržuje vaše baterie AA a AAA přehledně uspořádané. Je navržen tak, aby zabíral minimum…
EDIT: The top came out scratchy for me and the text did not show. I will definitely improve as soon as I can. Hang in there! I will be making an automatic battery sorter, with this ramp, an Arduino or Raspberry Pi, some servo motors, and…
So I've included the snap to connect to openGrid, if you want to use Multiboard, you'll need to get the Drop In Nut Snap and print 2x of them. Otherwise, print 2x of the included openGrid M4 Nut Directional Snap. You'll also need 2x m4…
Tuya Bluetooth Temperature Humidity Sensor LCD TH05F AAA case with room for battery holder The sensor can be found on aliexpress:…
AA / AAA battery box Battery box for 32 AA or 48 AAA batteries or 18 AA + 24 AAA batteries combined - depends on insert of your selection. Easy print with no postprocessing or supports. Print as it is. Box and clip design comes from my…
This is an improved version of Battery dispensers for AAA and AA batteries. Went through several designs to get here, after much prototyping and printing, got the one that works and fits perfectly, while accommodating substantial amount…
It's a AAA battery pack for three batteries that also has spaces for two LEDs, some resistors, and wire routing. Printing in a flexible material like PETG is probably ideal so that the pieces at the ends can flex out retaining the…
I made this keep my batteries safe and organized. I printed this in Black PLA.
Custom organizer designed specifically for the Cobra RX-100 walkie talkie 4-pack. This dock holds all four radios upright in individual bays so the kids can just chuck them in there when they are done and they dont get lost. The…
AA - The assembly will require 5 screws M3x15, M3x20. AAA - The assembly will require 6 screws M3x15, M3x20. If desired, it can be glued together. The model is designed for printing with PLA, PET-G, and plastic.
Battery crates with branded designs. The design plates need to be glued to the original model. For the multicolor looks i just paused mid-print and changed the filament color. The crate can be obtained on printables or thingiverse. I…
A tube that the outside diameter is the size of AA battery and slightly larger inside hole for the AAA battery. The thickness of the end is 4mm with a hole for a 3mm screw to be used for a contact. Depending on how tight the fit, use a…
I have some battery-powered motion sensor lights, and I got tired of changing the batteries all the time. Hardwiring them is easy but the wires ended up not staying in one place when it was all done, if that makes sense. This guide makes…
No special settings are needed. I used PETG and/or PETG-CF (I just like the finish with the added fiber) for more temperature resistance. The models shown were printed on a Core One with an 0.6 HF nozzle.
There are 2 versions. One holds 4 AAA batteries, and the other holds 4 AA batteries. The Clip is good for an inside pocket of a laptop or messenger bag. They are both embossed with the battery size. Best printed on their side. Batteries…
A simple AAAA battery holder to keep them tidy. Prints in PLA. Is not a tight fit because that would rip the battery skin but good for drawers, desks, or shelves to keep your batteries around that is not the original packaging.
A slightly more material efficient and versatile AAA battery Gridfinity bin. 3U + 4.4mm tall, making it the same height as a 3U bin with a stacking lip (See photos for visual) This design has the additional (and unintended) feature of…
I found Xavierly's set of Gridfinity battery holders really cool, but i wanted to stack baseplates and other things larger than 1x1 on top of them, so i made the height of the AAA holder (was 7U) to match the height of the AA (8U). So i…
So, you are looking for a stylish way to organize your AAA batteries. Well look no further! Or do, it is not really up to me. However, this holder has been designed to hold as many AAA batteries it can in an efficient manner. The wavy…
Hello, Sharing my project for battery holder/box. Fits 16x AA and 25x AAA batteries. Dimensions: 131 x 69 x 21mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs…
Printing Instructions To achieve the intended look of a miniature cardboard box and a wooden pallet, printing with Wood PLA filament is highly recommended for this project. The natural texture and color of wood filament perfectly…
Most spring loaded terminal chargers have difficulty creating a stable contact with AAA batteries due to the small diameter of the AAA battery. Typically you would need to hold the battery higher and let the spring terminals put pressure…
I've been using Perinski's tiered storage box to hold all my bits and bobs, and I wanted a place to also store all my batteries. I found that the 30mm x 8 compartments fitted most battery sizes very nicely, such as AAA and AA, C, and 9v,…
yes help meeeeee just push the latch it ll work
AAA battery box case magnetic designed for 10 AAA batteries use 6x3 magnets 4 pieces (2 to the lid and other 2 to body) use glue under magnets Print settings 0,2mm layer 3 walls 15% infill no supports
This is a storage unit and dispenser for AA and AAA batteries. It holds up to 39 AA and 35 AAA batteries. Print the main part twice, with one side mirrored. I’ve also included pegs to attach the parts together. A few drops of super glue…
Print with PLA PETG PCTG ASA or ABS. Supports are needed but not that many. Needs about 37g-38g of filament.
Made for AA and AAA batteries (14mm and 10mm diameter) with a tolerance of 0.2mm. Printed with PLA at 15% Infill.
I take spare AA and AAA on trips, this is a storage box I created to optimize the space. AA and AAA are staggered. Print in any material, print with no supports, lid should be flipped over.
This model represents a clinical case of an Abdominal Aortic Aneurysm (AAA). It includes the distal aorta and the bifurcation into the common iliac arteries, showing the localized dilation characteristic of this pathology. Technical…
This is a remix of Rossum's great dispenser for AA and AAA batteries. I've tried several others, but none were as good as this, and I've modified it to better suit my own needs. Printed on a Pusa MK4, using PLA and no supports
