1 / 3
Customizable case for AA, AAA, cylindrical batteries
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printable storage boxes for small sets of cylindrical batteries.
- Rating
- 4.733 / 5
- Likes
- 130
- Downloads
- 948
- Makes
- 15
- Views
- 3,224
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
3D-printable storage boxes for small sets of cylindrical batteries.
Designed to be leak-resistant: the body and lid have full-length overlap and there are no unnecessary openings. They are also a very snug fit so they should be secure without any additional fasteners.
Modify the second argument to battery_case() to set the number of cells the case should contain. The largest sizes that I have tested out are 6 × 1 cells and 4 × 2 cells.
Printing
- Use an extrusion width of 0.4 mm, and 2 perimeters.
- Optionally, use no infill and no top layers — there's plenty of strength without them.
- I used PETG plastic (3D Solutech clear) with a layer height of 0.3 mm. PLA should also be fine but I have not tested the final dimensions.
You may need to adjust the clearances depending on your printer and filament characteristics.