Customizable case for AA, AAA, cylindrical batteries
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printable storage boxes for small sets of cylindrical batteries.
- Ocena
- 4,733 / 5
- Polubienia
- 130
- Pobrania
- 948
- Wydruki
- 15
- Wyświetlenia
- 3224
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
3D-printable storage boxes for small sets of cylindrical batteries.
Designed to be leak-resistant: the body and lid have full-length overlap and there are no unnecessary openings. They are also a very snug fit so they should be secure without any additional fasteners.
Modify the second argument to battery_case() to set the number of cells the case should contain. The largest sizes that I have tested out are 6 × 1 cells and 4 × 2 cells.
Printing
- Use an extrusion width of 0.4 mm, and 2 perimeters.
- Optionally, use no infill and no top layers — there's plenty of strength without them.
- I used PETG plastic (3D Solutech clear) with a layer height of 0.3 mm. PLA should also be fine but I have not tested the final dimensions.
You may need to adjust the clearances depending on your printer and filament characteristics.