Counting matching models…
This is my improved version of the classic Flexi Rex. Somehow this version became the most popular one, maybe just because it doesn't break easily when handled by kids (and adults of course). I uploaded this model to Printables for…
Update 10.02.2023: I remixed the rotor with the toroidal design :) Feel free to test ist out! https://www.printables.com/model/394700-toroidal-rotor-4-strong-flying-propeller In addition, there are now many other great remixed propellers…
Mounting 4 x M5 or M6 screws Recommended print settings PCTG or ASA (for strength and UV resistance) Print on it's side (model default orientation) 3 or more walls 0.2mm layer height 7 or more top and bottom layers 10% gyroid infill No…
This stand holds an electronic screen at any convenient angle. It is sturdy, easy to assemble and print, and folds up for storage. Small sizes can fit in your pocket, and the largest size can hold a tablet. It can also accomodate…
A remix of Printojet's amazing design. Strong enough to be used without the front bar support with 2 sets of stiff springs. Bolt fork much stronger to cope with sudden joystick end-of travel bumps. Designed to have no flex with PLA <40%…
[English] I've tried various buffers and auto rewinders for MMU2S, and I finally found something satisfactory. That name is “Stronger Compact Spool Auto-Rewinder by rans”. It is great that it rewinds moderately, even if there is a lot of…
Highly durable TCG game mat tube with magnets - Fallen Dice logo
Printing the airless basketballs at full size works just fine but scaling them down to half size makes them a little bit too weak and difficult to print with a 0,6mm nozzle so I designed my own 120mm ball It has a lot thicker design with…
Strong shelf pin for Ikea and other brands, with filament insert. I needed replacement pins for the shelves. I was worried about their strength when printing. That's why I designed them with an inner hole, into which superglue is dripped…
Greatly reduced the amount of holes on the top and bottom, also adjusted the main body to increase overall strength. I also shrank the height of the container to make a 50 mm puck sized container:…
Intro A practical and robust 3D-printed holder designed to keep your zip ties (cable ties) neatly organized and easy to grab when you need them. This holder provides a simple way to store ties in one place — no more loose bundles or…
the base of the clips was broken after a while when using mine. So i redesign with this little modification adding a bevel at the base to reinforce the clips. Also the grip of the buckle is stronger. Enjoy
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl Key Features: -Non-slipping 16mm clamps with TPU inlay -Rotatable in three…
2020 Connector 3 Way Corner Bracket EXTRASTRONG _Alu Profile Suitable for: Resize to adjust dimensions Warning: Dimensional Tolerance Notice Please be advised that final print dimensions can vary due to printer settings, calibration, and…
Intro This is a super helpful bit wrench tool! Try it! You will love it! PS: The tool was designed to hold the bit rather tight - it will get worn out when you use it a couple times. Use pliers or a thin nail (opening on the top) to get…
Intro This is a super-mini wing bit holder with a nice handle! Try it! You will love it! PS: The tool was designed to hold the bit rather tight - it will get worn out when you use it a couple times. Use pliers or a thin nail (opening on…
This model enhances the mechanical strength of existing pipe/rod connectors about 5 times by strategically optimizing layer adhesion with an reinforcing ring element.
First, let me say I am sorry about the image quality. This is a filament shelf bracket designed for ½ inch dowels. It was modified in FreeCAD. I would print this using at least 4 top/bottom layers, 3 walls and 20% infill (I use infill…
There is also a moisture circulation here, but it may not be as effective, since it was not critical for me. Printing with 3 perimeters and 25% infill turned out to be very durable, so you can change them as you wish.
The box is fixed to the frame so that it does not need to be supported by the table. Outer dimensions: 247.2x99.8x52 mm (without hooks). It's possible to print both the box and the lid at once. Before printing consider adjusting size of…
edit: now the parametric file is included! read instructions at the bottom to learn how to use it After the original bracket in my Ikea wardrobe broke I made a stronger replacement. It's also more convenient to use, because the rail can…
Polydryer drybox adapter bracket for Stronger Compact Spool Auto-Rewinder by Rans A modified axle with slits on both ends and an axle bracket that allows for the spool rewinder to slide nicely onto the drybox's existing spool holder…
This is a strong and practical dual spool holder for 3D printing filament. It supports either two standard spools or one heavy 3kg spool . The center includes a removable spacer disc , allowing you to easily switch between dual spools or…
This fan mount is designed for use with modular articulating arms, providing flexible installation for fans (e.g., PC fans, industrial blowers, or cooling systems) in various work environments. Features: Universal Mounting: Compatible…
A very strong hinge that can be printed in one go without assembly. The hinge can turn more than 180° and is 50X60 (Width X Length, open). This hinge could be used for a range of different purposes, such as cabinets, doors, woordworking…
This model is immensely fun to play or fidget with just like the tons of other Flexi Rexi models out there. This one is meant to be a more polished Flexi Rexi with rounded segment edges which allow for more flexibility and an even more…
Extra Strong Bicycle hangers. Designed to work on a Trolley Rail. I designed the hooks, to evenly distribute contact pressure on most bike rims internal surface. I tested multiple design variations in angles, rotations and size of shapes.…
Model I needed a strong grip with a comfortable grip. It attaches with two screws, the holes have a diameter of 5 mm. Let me know if you need a different design or hole diameter. Print Settings: Material: PLA should be fine Layer height:…
Slimmer, Stronger and locking remix of the Clipper keychain by Marekp. Stood the test of driving over with a car and the locking tab still holds up after a year of fidgeting with it. Printed with PLA at 0.2 layer height and 5 walls.
Added another layer to the original design to hold the individual Battery strap strongly in place - minimizing potential damage to the FC/O4 air unit during a crash. Added a version that holds the XT30 cable firmly in place, away from the…
The stand lets you install the heater to either blow upward or blow downward in your machine. Deflector only sits on top of the heater as its facing upward blowing heat towards the top glass. Nothing fancy. The tolerances were perfected…
Angle Bracket 30°- 45°- 90° - M6 - 1/4x20mm Slots The Bracket is a rigid angled mounting plate, available in 30°, 45° and 90° configurations. It features slotted faces for adjustable positioning and is compatible with both 1/4-20…
Benchy: Sailing Strong Since 2015 Celebrate one of the most iconic 3D printing benchmarks with the Benchy: Sailing Strong Since 2015 stand! This display stand is the perfect way to showcase your Benchy models, turning them from a simple…
Originally printed the Drybox from Prusa Guy but the first Prusament spool I inserted was due to some production fail 2 mm wider and could not fit in. So tried the mod from DG-RoboTek that gave me the extra milimeters but already during…
The Olivia Armstrong's Sword from Full Metal Alchemist! This listing is for the digital .STL files for you to download and print at home on your own 3D printer. Model is split for 250x250x250 machines, and recommended for printing in FDM.…
Let this strongman help you open your tissue box, he’s here to assist you! Print settings : Nozzle: 0.4mm Layer height : 0.2mm with adaptavive layer height Infill : 5% grid Wall loops: 2 Supports: Tree (auto) Printed with : PLA You can…
I recommend using the supports I included. The origin is set the same as the model (use supports marked "square" for the tray with ends marked "square") so that you can use the "Join" feature of your slicer. You could also use your slicer…
Inspired by Devilscave's Ultimate Spool Holder V3. Just like the original, my version can be used as a table stand, or can be clipped onto the frame of the Prusa MK3 (MK4). The original Prusa spool holder does not need to be removed and…
super simple and strong hooks that can be attached to both the ceiling and the wall. Print using at least 4 walls to be strong
Bring a bit of winter “street style” to your desk with this white puffer-jacket (Montclair-style) pen holder . The padded sleeves, front seam details, and chunky “pockets” make it a fun, modern desk accessory that still looks clean and…
This is a shower shelf with for a 25 mm shower bar designed for prusa mini with a razor emplacement with a stronger clamp to prevent the opening with the weight (and time)
Upgrade your workspace with one of these sturdy and elegant pen/pencil holders, featuring four designs of distinct grid lattice diamond-like patterns. This stylish organizer is optimized for 3D printing and ideal for storing pens,…
Glass eyes really give this little fella a whole lot more personality! :) I uploaded the 3mf file containing modifiers to allow for 2 x 6mm glass eyes to be inserted. No supports required. Holes for eyes should appear after slicing.…
This print bed scraper is designed for regular use, fitting your hand perfectly for maximum comfort. It can be resized to fit your printer while maintaining functionality. Put layyer hight as low as the printer will print for most…
A wall mountable version of my window hanger that can be easily extended into a 4 or more hook set. All pieces just slot together. To keep the dowel in place more securely you can glue the end caps on to fix it in place. A full set…
This ultra strong hook is designed for doors, shower walls and shower cabins up to 10 mm thick . Despite its compact size, it easily holds wet towels, bathrobes or heavy blankets – tested in daily use. The model is filament-saving , using…
The 3D modelled Solder Paste and Flux Dispenser is a compact and efficient device, perfect for electronics assembly. Its ergonomic design makes it easy to use, with adjustable dispensing volumes ensuring accurate and consistent results…
I didn't find such a part, so I upgraded it myself. They were very weak from the developer, they were constantly breaking, even during the build. Replaced everything with these Printing instructions: Use 3 perimeter wall thickness, 0.2 mm…
A fun and stylized strong man figure with a powerful build and a proud belly, wearing casual shorts. Designed to celebrate real strength — not just six-packs 😄 Great for display, painting, or as a conversation starter on your desk. Prints…
Organize your workspace with one of these sturdy pen/pencil holders, featuring four designs of distinct cage grid lattice patterns. These stylish organizers are optimized for 3D printing and ideal for storing pens, markers, brushes, or…
A simple filament clip preventing filament from unwinding. I've tested many filament clips that can be found here but none of them did the job without some compomises so I designed one for myself that: Is not below 1 mm thin and don't…
The “sunshinemakes 26 Pro ice scraper” combines quality and user-friendliness. The large handle ensures a good grip. It allows you to remove even the most stubborn ice from your car windows.
Maturity Very Good. 4 prototypes. In use since 2022/06. Description I previously designed a one-part desk hex organizer. This time, I wanted a modular one. I prefer hex organizers on a desk; maximum space optimization isn't necessary. The…
I accidentally bent the two side screw holes apart when trying to add tension to the servo. I thickened the sides a bit to keep this from happening. Low Rider MMU by GcodeGearHead
Upgrade your workspace with these pen/pencil holders featuring a squircle (rounded square) shape. Choose between either a helix or omega loop design. The stylish organizers are optimized for 3D printing and ideal for storing pens,…
Upgrade your workspace with these pen/pencil holders featuring a squircle (rounded square) shape. Choose between either a slanted or vertical ripple design. The stylish organizers are optimized for 3D printing and ideal for storing pens,…
Upgrade your workspace with these pen/pencil holders featuring a squircle (rounded square) shape. Choose between either a slanted or vertical wavy design. The stylish organizers are optimized for 3D printing and ideal for storing pens,…
Upgrade your workspace with one of these sturdy and elegant pen/pencil holders featuring four designs of distinct grid lattice diamond-like patterns and a squircle (rounded square) shape. These stylish organizers are optimized for 3D…
Replacement hinge for the babydan baby gate and others, made strong with the model designed to strengthen the shaft by running it down to the base of the model. Print in PTEG with 6 walls and 35% infil to remove any flex. Printing on a…
My partner designs costumes for plays, and when they complete one, they make a doll of one of the characters to commemorate it. One of these characters needed a machete, and there needed to be a way to attach it to the doll. I found this…
Other designs for connecting chain links that I saw seemed like the connector would be the weak link in the chain. So I designed an extra strong connector that should be nearly as strong as a regular chain link of the same size. I have…
This is the last door hook you'll buy thanks its strong design. Capable of holding up to 10lbs. Great for: Jackets Purses BookBags And so much more!
💪 Strong Female Gnomes – Garden Guardians with Gains! Tired of the same old sleepy garden gnomes? Meet the Strong Female Gnomes —a duo of swole sisters who’ve traded fishing rods and flower pots for deadlifts and domination! Supports are…
Original modified to add support and embossed the model name. Otherwise the design stayed the same. I just grabbed the bottom section and pasted it in a number of times to extend it. Modifications here on Tinkercad:…
Heavy Duty Table Vise - 100% printable - no support - ultra strong Next level: this optimized 3D-printed vise effortlessly handles a 2 kg load thanks to reinforced design. Create your own using the included STEP files. Dimensions: Length…
It has been tested on a KWS 10" rack and fits perfectly. This point is important: to minimize bending and long-term creep, the plate is supported both on the front panel and against the inside of the back panel. I designed this because…
Introduction With two of these you can create hard mechanical reference points to reliably square up both Y-axis Extra hardware: 2 * DIN 603 M6 x45 carriage bolt 2 * M6 nuts with nylon locking ring 4 * any type of M4x20 bolt Note: These…
Classic stronghold miniature designed as a tabletop stronghold for fantasy terrain, skirmish tables, and board game scenarios. Use it as a castle keep, fortified outpost, or a key objective on your map—instantly adds story and scale to…
Keep your living space organized with this sleek and sturdy wall mount designed for two Sony remote controls. This model is optimized to be lightweigt to save filament, yet strong enough to hold your remotes securely. 2 Versions included:…
Keep your living space organized with this sleek and sturdy wall mount designed for remote controls. This model is optimized to be lightweigt to save filament, yet strong enough to hold your remotes securely. 3 Versions included: -1:…
Keep your living space organized with this sleek and sturdy wall mount designed for remote controls. This model is optimized to be lightweigt to save filament, yet strong enough to hold your remotes securely. 3 Versions included: -1:…
Strong Woman Pen Holder – Confident Desk Statement This pen holder features a strong female torso with crossed arms, combining elegance and power in a functional desk accessory. The sculpted anatomy gives it a bold presence while the…
The original design is excellent, but I added a larger slot and a full through-hole so that you can wrap a bore snake cord around it for more leverage.
I simply added space inside the shaft to create additional thread reinforcement (roller-71 & 75).
Design Concept The Simple Hook features a minimalistic and functional design, perfect for organizing items efficiently. Use Ideal for hanging small bags, hats, keys, or other everyday items around the home, office, garage or workroom.…
Este remix es para el diseño original https://www.printables.com/model/73094-articulated-bender , al cual se le modificaron las articulaciones usando este otro diseño…
Neil Alden Armstrong — Buste 🇫🇷 Français Ce buste représente Neil Alden Armstrong, inspiré de la photographie la plus emblématique de l’astronaute : son portrait officiel de la mission Apollo 11. Le visage est traité dans un style…
Bigger version of model strong hook, you can use 3 screws for extra strenght. bottom screw insert from side .
A super strong sword fit for people 4+ How to print Use 25% gyroid infill. have the model print on its side then have fun. :) /!\ Disclaimer /!\ The stars on the side may be sharp. This product may hurt if you or anyone else gets hit with…
Heyho The massage roller combines harder Materials as a core and bearing and softer, flexible TPU as outer material to make it more comfortable to use! Design: I designed the TPU and Hard material parts so they bond together nicely and…
Heyho Here I have a hinge that is designed to be printed with 2 materials. A stiff Frame and a flexible Core + Connection. Also there is a support made out of the stiff material. The hinges are made with two materials ( soft & hard) . The…
Strong TPU Cable Strap Set – Reusable Flexible Cable Organizer Flexible, reusable cable management system printed in TPU! Specifications Material: TPU (recommended 95A) Reusable snap-fit locking system High flexibility Once secured, the…
Download the .STL file, slice it with your slicer, infill 20-25%. Block yours door in easy way!
This is a click on monopoly deal box that stores the cars inside and doesn't need a multi color printer to print the deal logo which just slots in the lid.
needed a durable holder for my chisels and screwdrivers after last one kept snapping or falling out. 3 screw through attaching point for extra strength.
A full thicker back buffer plate to add the the MMU3 Buffer Box to contain the buffered filament better than simple bars.
A minimalist badge holder designed for standard credit card size (85.6 x 54 mm). Perfect for everyday use, office badges, events or access cards. ✔ Simple and clean design ✔ Strong and durable ✔ No supports required ✔ Fast and easy to…
Hello, This is a strong rod bracket that I designed in order to carry the weight of 3 longs curtains of nearly 3m high and 1.5m width. The inner diameter is about 28.5mm and there is a hole in order to stop the translation. You need to…
This is a fully 3d printed strong and durable clamp. I used plain PLA for this print because it’s all I had on hand and it was plenty strong but I’m sure a filament like PETG would make the clamp twice as strong. Here are the printer…
The model is optimized to print flat on the bed, making printing simple and reliable with no supports required. Feature
I was tired of desiccant containers breaking, so here's a stronger one!
This piece combines standart pegs to a large strong hook. Get the pgs from https://beta.multiboard.io/hooks-and-pegs and secure the piece with two small (M3 12mm) wood screws.
