Stand, Holder for Phone and Electronic Screens (Adjustable, Folding, Strong)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand for electronics and phones in several sizes. Use printed or metal screws.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 145
- Makes
- 2
- Views
- 915
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This stand holds an electronic screen at any convenient angle. It is sturdy, easy to assemble and print, and folds up for storage.
Small sizes can fit in your pocket, and the largest size can hold a tablet. It can also accomodate handhelds like a Nintendo Switch.
Which Size and File?

| Height | Width |
Small | 40 | 55 |
Medium | 55 | 70 |
Large | 70 | 90 |
Jumbo | 105 | 115 |
Files are grouped into folders by fastener type (fully printed, 1/4-20, or M5) and electronics size (thin or thick). The diameter of the endstop at the bottom is 14mm for thin and 19mm for thick. The thin version is sized for modern smartphones without a case, and the thick version is sized for larger electronics and phones with cases. Knobs are separated into their own files. Be sure to match the fastener in the filename.
Metal Fasteners
Metal fasteners make the strongest and easiest to adjust hinge. You can use M5 or ¼-20 socket head cap screws (SHCS).
(2) M5x16 SHCS and (2) M5 hex nuts, or
(2) ¼-20 x ¾-inch SHCS and (2) ¼-20 hex nuts
The screws will cut threads into the printed knobs for a tight fit. Use some glue to make the connection permanent.
Printed Threads
You can also make printed fasteners for a fully printed project. (Thread template here: https://www.printables.com/model/989431-custom-threads-for-3d-printing-parametric.) I have a few recommendations below.
Tune your seams! Bulging seams cause binding and excess friction. I have success printing threads with thin layers (0.1 mm), scarf seams, and random seams. Printing external perimeters first can also help.
The test print uses a standard tolerance with the bolt labeled Bolt_D. If you want to chase the perfect fit, you can dial in your slicer/printer settings or print alternate bolts.
A is the tightest fit (smallest clearance)
H is the loosest fit (largest clearance)
The steps in clearance are pretty small, so move up or down several sizes if your test threads did not work. Shift one size to fine tune the perfect amount of friction.
Thanks for visiting, and enjoy!
Minor update: Fixed the bottom chamfer on several models, and adjusted some sizes after more testing. Adjusted the brace for a more consistent appearance between sizes.
Major fix: Thanks to Luigisvc for pointing out that some files were missing from the downloads. The printed bolts are now back where they belong.
Minor fix: Fixed an extrusion error on the printed thread models.