Spool Holder for Prusa MK3 (Strong Version)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool holder for Prusa MK3 Series printers. Tested with 2kg spools. Can also be used as a table stand.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by Devilscave's Ultimate Spool Holder V3.
Just like the original, my version can be used as a table stand, or can be clipped onto the frame of the Prusa MK3 (MK4).
The original Prusa spool holder does not need to be removed and serves as a safety back-up, if needed.
Tested with a 2kg Prusament spool.
Print instructions
- Printing orientation from the file.
- No support is needed.
- The spool holders are optimized for layer height 0.3mm with first layer height of 0.2mm.
- The spacers are optimized for layer height 0.15mm with first layer height of 0.2mm.
A total of 2 bolt sides, 2 nut sidess, and 4 spacers need to be printed.
BOM
- 4 piece of 608 bearings (from inline skates)
- 8 piece of M3 x 16mm socket head screws (inbus screw)
- 8 piece of M3 nuts