Spool Holder for Prusa MK3 (Strong Version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool holder for Prusa MK3 Series printers. Tested with 2kg spools. Can also be used as a table stand.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by Devilscave's Ultimate Spool Holder V3.
Just like the original, my version can be used as a table stand, or can be clipped onto the frame of the Prusa MK3 (MK4).
The original Prusa spool holder does not need to be removed and serves as a safety back-up, if needed.
Tested with a 2kg Prusament spool.
Print instructions
- Printing orientation from the file.
- No support is needed.
- The spool holders are optimized for layer height 0.3mm with first layer height of 0.2mm.
- The spacers are optimized for layer height 0.15mm with first layer height of 0.2mm.
A total of 2 bolt sides, 2 nut sidess, and 4 spacers need to be printed.
BOM
- 4 piece of 608 bearings (from inline skates)
- 8 piece of M3 x 16mm socket head screws (inbus screw)
- 8 piece of M3 nuts