307 models
Printable 2kg spool holder for Original Prusa MK3/S/S+. The spool holder was specially designed for Prusament 2kg, but it can be used for any spools. Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of…
Printable 2kg spool holder for Original Prusa MK4. The spool holder was specially designed for Orignal Prusa MK4 and Prusament 2kg, but it can be used for any spools. Perimeters: 2 and more, Infill: 30% rectilinear.
You will need bearings. for 2kg three 608 for 1kg two 608 for 250g two 696 Among the STL files are auxiliary bearings - before you get the necessary pieces :-)
Spool holder attached to the frame.
This 2kg spool holder consists of two parts. The adapter screwed directly on the original spool holder can support your very initial projects, but long term its not enough. The holder is there to support the adapter, enahnced by a little…
All I did is take what Prusa provided on Printables, and made it longer, that's all. I've found that I lacked places to hold 2kg spools while working. Now I don't. If someone else find this useful, happy printing! Don't throw short…
This is a spool holder designed to mount inside the Original Prusa Enclosure. It has a spindle that screws to the main bracket, so that an extension piece (or a longer spindle) can be screwed in when you want to use a 2kg spool. To…
Will fit spool width of 45mm-110mm (~ .5kg - 2kg spools) Copied from original model by Copanko : Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap…
Prusa CORE One+ and CORE One L 2kg Spool Holder This spool holder is a remix of the official Prusa CORE One to CORE One+ upgrade, adapted to support heavier 2kg filament spools. It uses the standard spool holder puck system, ensuring…
A modular Spool holder that supports both 2kg and 1kg spools for the Original Prusa Enclosure (MK4/S & MK3/S/+). PRINTING RECOMMANDATIONS: Print with a nozzle not bigger than 0.6mm; Print with a layer height not taller than 0.3mm; We…
I originally wanted a 2kg spool version of the Spannerhands spool holder. After editing the original stls, I noticed that due to the increased dimensions the print was sagging. Therefore I rebuilt the original design, increasing stiffness…
2kg Spool Holder for Core One I would recommend printing it with PETG and using at least 4 perimeters to ensure it is sturdy enough. It should be assembled with 4xM3 screws. The model was designed according to:…
With this adapter you will be able using your default Prusa spool holder for 2kg spools (of 30cm diameter). Simple click system. No tools needed. Can be printed with PLA without support. Brim recommended. Please pay attention to the…
This model work only with the OLD version of ReFill. If you have recently purchased ReFill products with the cardboard core, please download the updated flanges HERE ReFill is manufactured for usage with re-usable master spools like in…
a 2kg spool holder, i have many 2kg/2.3kg/2.5kg spools from different manufacturers and all fit properly. Print instructions i personally printed this with 5 parameters and seems way too rigid, i think less parameters will work fine too.
J'avais besoins d'un support pour ma bobine de deux kg, mais ce que je trouvais en ligne ne me satisfaisait pas. J'ai donc créer celui ci et j'espère qu'il vous plaira. Vous aurez besoins de 2 impression de chaque et une seule de “tube”…
2KG spoolholder, remixed from the original 1KG spool holder. It is required to remove one plastic rivet from the frame for one more screw that willl give extra support for the spool holder. Mine is printed with 6 walls, 25% infill, 0.6mm…
Easy to print and simple spool holder for 2kg spools with hexagon pattern. The walls are compatible with the Honeycomb Storage System and can be used to fix multiple units together or just store tools like snippers. You need to print 1x…
Extension of standard holder for recycled 2Kg spool.
2kg Spool Holder for Core One, modified from the original 1kg spool holder.
I made this addon for the 2kg spool holder because the filament always jumped off the spool when the print head was too high. It uses 2 M3 nuts, 1 M3x30 screw and 1 M3x10 screw. I also used the short bowden tube from the original filament…
Using 2kg spools for printing require a spool holder extension. I got inspired by a model of MartinL and his simple extensor. But his model just doesn't fit, because it has just a blank hole without clips/pins. So I modelled my own…
Originally saw Nomad's Galaxy variation, but was not happy that it does not look like original Core One spool holder. Additional hardware: For Core One + O-ring from the original holder (25x3.5 mm) - you can even print a new one,. For…
A large clip by JeyMco for bags like dry pet food. I added treads to the sides for better grip. Ein großer Clip für Säcke wie z.B. Trockenfutter für Haustiere. Für besseren Halt habe ich Profil an den Seiten hinzugefügt.
I had issues with the original design in the Original Prusa enclosure. It wasn't wide enough, so the spool wouldn't spin properly and would bind. I also had the ABS split when I put on the original stick, so made that a bit larger on this…
PLA+ Layer 0.2 infill 20% Wall 5 no Support Short Version: 125g ca 4h Endstop super glue it (optional)!! at your own risk :P gift coffee money Bitcoin: bc1qx7lu8wjtka03pcagmqr8ky6nr5wt78u0x5qccu
Prusa Enclosure Spool Holder Rod / Arm 2KG 125mm for big recycled spools
Remix of original Prusa Core One L spoolholder for 2kg spool.
This is an extended version of the original Prusa CoreOne+/CoreOne L spool holder. The stock holder fits only standard 1 kg spools, so I redesigned it to support wider filament spools used by many manufacturers. The model also includes a…
Update 01/10/26 Increased cutout for the bases by 1 mm. Update 04/09/26 Added 3mf print file Adjusted left and right base sensor cutouts. Update 30/08/26 - New revision added, the following has been added. Desiccant storage system has…
Similar to the HT90 Spool Holder, this spool holder twists to extend or shrink to adapt to different spools. Very Simple little replacement base to mount the Twisting Spool holder to the CORE One. Original File (And spot to get the spool…
The "axe" part is the same for the 2 supports V1 and V2. La pièce "axe" est la même pour les 2 supports V1 et V2.
This spool holder is a 90 degree rotated version of the Original Prusa MK3S+ Prusament 2 kg spool holder redesigned from scratch, based on the original holder dimensions. I cannot guarantee that this will not break or do some damage to…
If you've just bought a 2kg spool of filament and immediately realized that it won't fit into a standard holder, you don't have to use a broom handle to hold your spool during printing. Just download this extended holder that will fit…
This model extends the injection molded part that comes with the Prusa Mk3 family of printers so that it can hold 2kg spools and remain compatible with the Prusa Enclosure. Printing Orientation I recommend printing this vertically (as…
Prusament 2KG Spool did not fit on the original design. So i made the left frame and screw about 3cm bigger. Remix of: https://www.printables.com/model/62910-use-m3-screws-spool-holder-for-prusa-mini-flexible If you need the spoolholder…
An adapter and holder to be able to mount 2kg spools of filament onto a Prusa Mk4 sample holder. I printed both pieces in PLA and it seems to be working fine. But probably PETG or ASA would be better longterm. I printed the adapter with…
One of the biggest pet peeves of mine with all of the enclosed Bambu printers is there rear mounted spool holder. It's hard to get it and pretty much means you can't place the print flat against a rear wall. So I designed my own side…
Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…
Summary: This spool holder component is for Prusa MK2, MK3, and MK4 printers. This spool holder is compatible with the default provided injection molded spool holder from Prusa, and matches the same aesthetic. The 1kg version of this…
I took Bastiif's idea ( https://www.printables.com/fr/model/295403-2kg-spool-adaptor ). This version is easier to print horizontally. I recommend printing it in PETG with a layer of 0.2mm and an infill rate of 50%. Print Settings Printer:…
Avoid brittle PLA's for this, it needs some flex. Snaps on perfectly with this PLA+. Will be uploading another model without the splits for TPU/TPE for a water-tight fit. Print settings (Cura): Walls x 3 Top/Bottom x 6 .2mm layer height…
PLA+ Layer 0.2 infill 20% Wall 5 no Support Endstop super glue it (optional)!! at your own risk :P gift coffee money Bitcoin: bc1qx7lu8wjtka03pcagmqr8ky6nr5wt78u0x5qccu
Larger version of Prusa Research Enclosure spool holder for use with 2kg filament spools. To mount the spool holder - complete you will need the following fasteners*: M3x8 screw (2x) * The package of the Original Prusa Enclosure includes…
A stabilizing leg for the 2kg MK4 spool holder.
This is an adjustable spool holder, which can assembled in various widths. Simple insert the arms in different parts of the slider to adjust the width, and use the removable rings (which can be fixed with a rubber band) to prevent the bar…
This is a spool holder designed for 2kg filament spools, created specifically for the Prusa Core One 3D printer. The design includes ball bearings for smoother filament unwinding and reduced resistance during printing. There are two…
A little Adapter that can simply be pushed on the standard spoolholder on the Original Prusa i3 MK3S+ 3D printer. With the Adaptor you can now hold 2kg spools and still can fit a small/1kg spool on the holder without removing the adaptor.…
This is a remix/augmentation to the fine respooler designed by Miklos Keszely. This allows you to take filament from 2kg to 6kg large spools and put them on 1kg standard spools for use in a dryer box or whatever suits you. Print the frame…
Dual filament spool holder that can hold 2kg spools. Designed to fit onto 2020 Extrusion such as the Ender 3. This holder pushes the filament spools back to allow room for tall hotends to reach their full Z travel. Screw holes are sized…
Holder to keep 300mm diameter, 103mm wide spools with 2Kg filament on track. Fit PC4-M10 PTFE coupler 2x Ball Bearing 608 z needed Print instructions Made of PLA 0,3 draft, 20% infill, no support needed.
The original spool holder for the SV08 max is sized for a 1kg spool. That is dumb as this monster needs ample filament for long prints. This extension adds 50mm to the spool holder to accommodate 2kg and 3kg spools. This does seem to be…
Inspired by the HT90 and Karkovski's spool holder, this is a simple remix that attaches it to the Core One + Mount. This requires the O-Ring normally required by the Core One+ upgrade. Also requires the new Core One+ spool holder mount…
Update May 25, 2022 - Added a 3MF file after using the “simplify model” in PrusaSlicer to reduce the triangles in the mesh. Now only a 2MB file for both the container and the lid. Silica gel spool container resized to 120mm to fit in 2kg…
spool holder form Original Prusa MK3 with filament guide. this one have low angle to fit printer in lower shelves.
Filament guide that fits to Prusa and @panak97_765577 "Original Prusa MK4 Prusament 2 kg spool holder" Version 2 have fittings for 10mm diameter PTFE inserts. Spool holder from @panak97_765577 can be found here And the original Prusa…
The original Prusa version had a lot of bounce and eventually broke. I made some measurements of the broken part, drew it up, made it stronger. The second version ( v2 ) is a mirrored version of the original with a trimmed bottom tab…
I slightly modified model of 2kg spool holder to be able to put it on the upper shelf over the printer.
*** 28.02.2024 UPDATE *** Long Filament Guide V2.1 *** 26.02.2024 Publication on Printables *** Recommendation PETG or better. You will need an M 3 x 10 mm screw with nut to fix the filament guide to the main holder. With 1 extension you…
I needed a larger diameter version of the Prusa spool holder for 2kg spools. It now accepts spools with 30cm diameter & 10cm width. The Original STEP file included in the MK4 version is in bad shape overall, so to do my changes I needed…
This is a simple yet robust filament spool holder designed to accommodate spools of any size, from 1kg to 5kg and maybe more. Its simple design is easy to assemble and requires minimal parts as well as not taking up lots of space when not…
I wanted a spool holder for either a 2kg spool or 2 x 1kg spools to put on top of my DIY Prusa enclosure. I remixed the single spool holder, which was itself a remix of the 5x spool holders. It can hold: one 2kg spool two 1kg spools three…
This design takes aspects of @Tony 's Longer Original Ender 3 / Ender 5 Spool Holder + Nut , and crandell2's Ender 3 POM V roller Spool Holder on Thingiverse. I love to re-use parts where I can, and POM wheels (or their bearings) are no…
This is a remix of another PRUSA spool holder (see link below). This variation adds an additional screw at the bottom of the bracket to prevent the parts from splitting apart after they are screwed together. This spool holder is…
While using Prusa 2kg spool holder my filament got tangled around spool holder or the machine. That led to low quality prints and required me to constantly monitor printer and untangle filament.…
Filament holder 2KG / 4KG on the wall You will need to buy a 24mm round wooden stick and some glue. Držák filamentu 2KG / 4KG na zeď Budete si muset koupit dřevěnou kulatou tyčku o průměru 24mm a nějaké lepidlo.
Spool holder for UliMaker 3, S5 and S7. Supports one 750g spool plus one 2.2Kg Spool. Fits perfectly on the printer with the original NFC sensor and bottom part. Prints in two parts, with 4 alignment pins.
Remix from the Gravity Spoolholder, for 2kg Prusa Spools
a 14.5 cm spool rail original: https://www.printables.com/model/57214-mini-printable-parts you can find the other part under: files > Mini Spool Holder
this threads in to the stock locations, it is a remix of @TheDibbler_613760's design i just made is way more dense.
I have extended the lengths of the spool holder and the filament guide so it accommodates a 125 mm wide spool.
This is a (remix) 2kg spool/filament holder extension, which can be printed without using supports. It fits on the original prusa i3 (mk3/mk4) spool holder. It can also be used in the official prusa enclosure.
2KG spool holder for Ender 3 S1. Fits into the original holder
I remixed spool holder perfectly sized to accept both 1Kg Prusament filament spools and 2KG Pusament filament spools. Other spools may fit, but it requires you to measure :-P The large spool size accepts 125mm maximum spool with and the…
TL;DR: Parts and Assembly This is a slightly wider version of tommyvn's New-Spool Dry Box spool holder, able to hold spools up to 136mm wide, including the new 2kg Prusament spools. You'll need: 1x print the included model 4x 608 ball…
For 2kg or lighter filamentspool. Infill: Honeycomb 15% Filament PLA Layer: 0,3mm To put it together You need: 2xM4 nuts 2xM4x12mm screws
I remixed alecs.form 's Filament Spool Holder for IKEA SKADIS ( https://www.printables.com/model/116706-filament-spool-holder-for-ikea-skadis ) to use a 2kg Spool of the recycled Prusament (or 2 normal Spools). I changed the Design to use…
Rather simple 2 piece Spool holder for 2kg+ Spools. Slides into each other and is therefore a variable length. Designed it as I wanted a holder to put in a box without drilling holes into the box Print time just below 2 hours each…
I wanted to be able to use Prusament 2KG spools in an enclosed dry box mounted on the Prusa XL 3030 frame. I remixed my Universal Rewind Spool Dry Box, Drybox mounted to Prusa XL / 3030 Frame Using Filler Brace to work with MattB’s Wider…
Longer version of spool holder that did not fit larger 2kg spools that are not as wide but rather large in diameter.
Extension rails for the MINI+ spool holder to fit 2kg Prusament spools
Large clip that works for 12kg dog bags. I use 2 for mine :) Slides on easily enough, while still keeping the bag together (I usually fold/roll the bag top first, then place the clips. Printed with 0.6mm nozzle at 0.35mm layer height with…
This adds 60 mm of length to hold the 2kg rolls. It holds amazingly and spins smoothly!
This wall mount spool holder prints in less than 1h and is actually stronger than many other designs. I have tested it to hold 10kg at the tip without any sign of weakness, so don´t be afraid by it´s light design ! It's not designed to…
2Kg spoolholder for Prusa enclosure We use original sides with rollers from Mini spool holder, but we use different piece to join them as a stand that is also mounting to Prusa enclosure. Why: I was looking for different ways ho to store…
The Drybox is a remix and recreation of above models. It is build to fit directly on top of the Prusa MK3S+ Printer and has a shaft to hold the spool, so no need for any bearings and other tubes. To attach everything you will need this:…
2KG spool holder for Bambu lab P1P, it doubles as a side mount if you only use 1KG spools. This will mount on the LH side of the display. I used the existing screws from the metal spool holder and installed them in the upper holes.…
Specifically for the Prusa Mk4 to hold wide spools like the 2kg spools. The support arm sits on the wider part of the metal frame and fits snuggly into spool arm end disk. you will need infill just at the very top of the model to get good…
Remixed the original to support a 2kg spool of Prusament. You still need 2 608 bearings.
The Prusa Roller XL is the name of a new filament unwinding tool which fits all common filament rolls. It has been designed so that the extruder has to overcome as little rolling resistance as possible. My motivation for designing the…
Made a simple adapter so it would fit the 2KG spools from Prusa. It is detachable to keep the original design of the spool holder when not using 2KG spools.
This is actually the first thing I printed in Prusament recycled PETG, still using a broomstick as Spoolholder as the filament spool did not fit my original creality spoolholder. It holds up nicely for 2 months now so I am confidently…
Además de los .stl necesitamos varilla roscada de 8mm con varias tuercas y 2 rodamientos 7x8x22mm https://is.gd/YzvKqi
Tisk - materiál PET-G, rychlost 0.2mm, výplň dle souboru *.3mf Další použitý materiál: - šroubovice průměr 8mm, délka 195mm - 4ks samojistící matice 8 - 4ks podložka 8 Doplněno pro vodítko filamentu - matice M3n (použil jsem z náhradních…
Spool holder extension for original Prusa spool holder. For MK3S+ and MK4 spool holders. New part Overview The old part (1) is straight, new part (2) is more tapered. This helps to have a gap between Filament Guide addon and filament…
Spool holder for 1-2 kg of film. With a twist, the holder can be pulled out and locked again. Secure the end piece with superglue. Spulenhalter für 1 - 2kg Filment. Mit einer Drehbewegung kann man den Halter herausziehen und wieder…
Longer version of filament guide that fits Spool Holder for Large 2kg Spools
Universal stand capable of holding all sorts of spools, that features: Holding up to ⌀270+mm x 105mm wide 3kg spools Widely available 608 bearings for stable heavy spools rolling Aluminum pipe as roller for long life 8mm honeycomb…
