Dog Food Can Lid (1.2kg or 100mm diameter)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Avoid brittle PLA's for this, it needs some flex. My Esun PLA+ plus works perfectly.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 249
- Makes
- 4
- Views
- 1,003
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Avoid brittle PLA's for this, it needs some flex. Snaps on perfectly with this PLA+. Will be uploading another model without the splits for TPU/TPE for a water-tight fit.
Print settings (Cura):
Walls x 3
Top/Bottom x 6
.2mm layer height
4mm width
210c print
60 c bed
60mm/s
Flow 94% (gives me accurate measurements without any signs of under extrusion)
Coasting enabled
Coasting Volume 0.032mm3 (helps remove the seem)
Fan 0% first layer to 100% at layer 3
No brim or skirt needed unless you have terrible bed adhesion. Add a brim or just slow down first layer.
Print Settings
Printer:
Voxelab Aquila S2
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
None
Filament:
eSun PLA+
Orange Post-Printing =============
Category: Containers