1 / 8
Original Prusa Enclosure 2Kg Spool Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Finally a way to use 2kg spools inside the Original Prusa Enclosure for MK4/S & MK3/S/+
- Rating
- 4.25 / 5
- Likes
- 43
- Downloads
- 752
- Makes
- 5
- Views
- 1,622
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Standard Digital File License
A modular Spool holder that supports both 2kg and 1kg spools for the Original Prusa Enclosure (MK4/S & MK3/S/+).
PRINTING RECOMMANDATIONS:
- Print with a nozzle not bigger than 0.6mm;
- Print with a layer height not taller than 0.3mm;
- We Recommend printing with PETG, ABS, ASA, PC Filaments improved durability and temperature resistance;
- We Recommend printing on a Satin/Textured PEI Bed (to improve first layer adhesion)
- In PrusaSlicer (and most other slicers) → Print Setting → Layers and perimeters → Avoid crossing perimeters: ON (to reduce stringing);
- In PrusaSlicer (and most other slicers) → Print Setting → Layers and perimeters → External perimeters first: ON (For better surface finish and tolerance);
- Print with at least 20% Infill;
- Print with at least 4 Perimeters.