1 / 2
2kg Filament Spool Holder for IKEA SKADIS — image 1
1 / 2

2kg Filament Spool Holder for IKEA SKADIS

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Filament Spool Holder for IKEA SKADIS with 608 zz bearings and aluminiumrod

Rating
5 / 5
Likes
12
Downloads
110
Makes
1
Views
1,813
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

I remixed alecs.form's Filament Spool Holder for IKEA SKADIS (https://www.printables.com/model/116706-filament-spool-holder-for-ikea-skadis) to use a 2kg Spool of the recycled Prusament (or 2 normal Spools).

 

I changed the Design to use 4x 608 zz Bearings and 2x aluminium rod's for better unwinding

 

Printinstructions:

use the included .3mf File (Skadis Filament-Holder) , sliced for a Prusa MK3S+ with mostly standard settings and 0.20mm Layerheight, support for the plugs.

or use the STL file (Skadis Filament-Holder) to slice it yourself, split the STL file in your PrusaSlicer into Objects, there should be 4 parts afterwards, for the infill parts choose your infill an set them to no top and bottom layers.

Print 4x Skadis Filament-Holder_plug to cover the holes where the bearings are to stop the aluminium rod falling out

 

to use it with 2 normal Spools i made a Spacer witch fits over an 8mm aluminium rod, print it 2x (Skadis Filament-Holder_spacer )

 

to complement this i used my Lack Filament Guide https://www.printables.com/model/454385-lack-filamentguide

 

for easyer remixing i attached a STEP file

 

 

This design was also inspired by  ChristianStalenberg (https://www.printables.com/model/159397-mmu-filament-spool-holder-ikea-skadis)

Tags