1 / 5
Sovol SV08 Max 2kg or 3Kg Spool Holder Extension — image 1
1 / 5

Sovol SV08 Max 2kg or 3Kg Spool Holder Extension

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Easily mount larger 2-3kg spools on your large Sovol SV-08 Max

Rating
4.75 / 5
Likes
16
Downloads
222
Makes
3
Views
653
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The original spool holder for the SV08 max is sized for a 1kg spool. That is dumb as this monster needs ample filament for long prints. This extension adds 50mm to the spool holder to accommodate 2kg and 3kg spools. This does seem to be close to the limit of the folded steel bracket and m3 mounting hardware. 

To use, just print it  horizontally so the stress is perpendicular to the layer lines or at an angle. Then slide he the long end into the hole (phrasing?). No glue required. If someone wants to make a 3d printed clamp I'd live to share it.

Files:
spool_extension_flat.stl (use this)
spool_extension_round.stl

Print settings:
Any filament you want it's not on the inside or the printer
3 - 5 walls
infill: 10-20% (The walls make the strength not the infill)
Support: Yes, build plate only
 

Tags