Sovol SV08 Max 2kg or 3Kg Spool Holder Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily mount larger 2-3kg spools on your large Sovol SV-08 Max
- Ocena
- 4,75 / 5
- Polubienia
- 16
- Pobrania
- 222
- Wydruki
- 3
- Wyświetlenia
- 653
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original spool holder for the SV08 max is sized for a 1kg spool. That is dumb as this monster needs ample filament for long prints. This extension adds 50mm to the spool holder to accommodate 2kg and 3kg spools. This does seem to be close to the limit of the folded steel bracket and m3 mounting hardware.
To use, just print it horizontally so the stress is perpendicular to the layer lines or at an angle. Then slide he the long end into the hole (phrasing?). No glue required. If someone wants to make a 3d printed clamp I'd live to share it.
Files:
spool_extension_flat.stl (use this)
spool_extension_round.stl
Print settings:
Any filament you want it's not on the inside or the printer
3 - 5 walls
infill: 10-20% (The walls make the strength not the infill)
Support: Yes, build plate only
