1 / 4
SCX24 Rock Slider Low CG Battery Holder Saddle Bags
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 1s or 2s batteries
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
Original battery pack died and the 2s drone batteries don't fit in the stock location. These were designed around Tattu 2s 550mah batteries that are about 60mmx15mmx18mm but are oversized to accommodate possibly larger batteries. Use small rubber bands to secure batteries if desired. I've also run it with a single 1s battery on each side wired in series. Uses factory hardware to mount. Print mirror image for opposite side.