P
Printables
scx24 Land rover defender Roof rack
just needs four bolts. easy to print. Have fun!
Wyniki wyszukiwania: scx24
Liczymy pasujące modele…
P
Printables
SCX24 tracks -NO HARDWARE-
I know there are some tracks already available, however, they were way too big for my truck, not very scale and you need additional hardware. Also if your axles have caster these other tracks won’t fit. With my design you only need: 24…
P
Printables
Axial SCX24 High Clearance Suspension Links - Gladiator/Power Wagon
Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the SEMA links on Cults. V1 and V2 have identical footprints/outlines – the only…
P
Printables
axial scx24 dodge power wagon trailer hitch mount
i printed mine with petg cf for strength printed on its side is stronger
P
Printables
SCX24 LCG Motor mounts
I'm about to redesign some motor mounts for standard gearboxes including some common motors. I started with the INJORA Purple Viper mount which is unfortunately NOT available as a spare part at the moment If interested always try first…
P
Printables
Axial SCX24 High Clearance Suspension Links - Deadbolt / Betty
I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…
P
Printables
Scx24 Ski
I replaced the front wheels with this ski, and it worked with out changing the drive train. I just took the drive nut off and let the axle spin. To get the other ski, you will have to mirror it in the slicer. Printed in pla with supports.
P
Printables
Scx24 skid plate
This skid plate was designed to help protect the servo. it also helps things not get hung up on the servo. It clips onto the front stock bumper of the scx24. I used a piece of tape to keep it from sliding sideways. Printed with supports…
P
Printables
SCX24 headlight to rock lights
Use your headlights as rock lights when removing the front bumper of the Axial SCX24.
P
Printables
Customizable Locking Hex Hubs for SCX24
Fully Customizable Locking Hex Hubs I was tired of dealing with the tiny pins when changing wheels on my scx24 so I made a hub that eliminates the need for the pins. Instead, it uses a standard M1.4 scx24 screw, either 5mm or 5.5mm in…
P
Printables
Axial SCX24 Deadbolt rc crawler front bumper
mounts directly to the frame, no bumper support required. lines up with original scout body - only works with deadbolts with original body hardware needed: 4x original screws or 2x M2 screws
P
Printables
Axial SCX24 Deadbolt Rear Bumper
Simple rear bumper for the Axial SCX24 Deadbolt. mounts straight to the rear of the frame without need for a bumper mount. lines up with the stock scout body. the loops are for aesthetics, i wouldn't recommend putting tow hooks on it…
P
Printables
scx24 car and controller holder (4runner and modded body test only)
I made a holder for my scx24 just because i was bored.This version fits a stock controller and 4runner car (modded body)
P
Printables
SCX24 Gladiator bumper with winch and stinger
Printed on my Prusa mk3s @0.10 layer and after i printed on my Elegoo Mars @0,05 layer. obviously the resin printed one it's way better (printed with a mix 50/50 of elegoo ABS Like and Syraia mix (blu+tenacious 60/40) please leave a like…
P
Printables
scx24 wheel for lego tire
for when you want lego tires on a scx24, you can see have a offset and they are on stock axles.
P
Printables
TRX4M Modular Track Part 3: SCX24 Customizable
Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…
P
Printables
TRX4M Modular Track Part 5: SCX24 Customizable
Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…
P
Printables
TRX4M Modular Track Part 6: SCX24 Customizable
Customize your track to fit your vehicles track width.
P
Printables
TRX4M Modular Track Part 10: SCX24 Customizable
Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…
P
Printables
TRX4M Modular Track Part 11: SCX24 Customizable
Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…
P
Printables
TRX4M Modular Track Part 12: SCX24 Customizable
Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…
P
Printables
TRX4m Modular Track Part 11.A SCX24
Took the amazing design from Ed which was then remixed by Dieter Spillmann and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people…
P
Printables
TRX4M modular track SCX24
Took the amazing design from Ed which was then remixed by RJ Patawaran and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people…
P
Printables
Scx24 LGRP Comp Chassis Magnet mounts
I needed a magnet mount solution for my LGRP Comp Chassis. So I came up with this. Its meant for 12x2mm magnets, but feel free to remix it for other sizes. Just respect the license and credit my model. The mounts just go inbetween your…
P
Printables
scx24 1 ton rims
wanted to make something for the scx24 thats more my style and so i could use it on the rc rig i plan to make later on
P
Printables
SCX24 RC BODY DEUCE IN A HALF MILITARY TRUCK
Online 3D Printing Instant Quote - JLC3DP great place to have your RC body to be printed for cheap and they use resin with the printing so everything will show it detail. THIS IS A OPTION IF YOU DON'T HAVE A 3D PRINTER
P
Printables
SCX24 With Stinger
I made an scx24 front bumper with a Stinger to be glued/epoxied in place print the stinger flat for layer line strength I used 0.16mm for the stinger.
P
Printables
scx24 deadbolt LCG frame rails
requires your own drilling easy to print hope you like it Thanks, and have fun!
P
Printables
RARE! SPECIAL SCX24 RC BODY 1967 INTERNATIONAL HAVESTER SCOUT 800 SUPER DETAILED
requires drilling for mounts and the JUL rear mount is required but that's it. I have put days into making this work so enjoy the classic truck and you might see a truck version and a no top version will be making accessories for this Rc…
P
Printables
SCX24 deadbolt body- 1967 International Harvester Scout 800 truck
just drilling no extra mount have fun! No top version is coming out soon!
P
Printables
SCX24 Deadbolt - 1967 INTERNATIONAL HARVESTER SCOUT 800 ROLLCAGE BODY
requires the same JUL bracket as the top version requires drilling for mounts if not upgraded have fun enjoy the three version of scout.
P
Printables
scx24 direct mount Suzuki Samuri truck body
this model should be able to print easily with a few supports if you print, could you put a picture of it printed in the comments Thanks! HAVE FUN!
P
Printables
scx24 direct fit Suzuki Samuri XL bed
easy to print may require supports for printing have fun! Thanks!
P
Printables
SCX24 6x6 RC body
easy to print may require supports to print fully DIY project fun to do with the 3d printer HAVE FUN!
P
Printables
scx24 direct fit Land Rover Defender D110 super detailed
this RC body should be easily printed with supports. going to put accessories out for it! Have fun! PLS comment if it prints well?
P
Printables
Scx24 LCG frame pieces to complete the chassis
requires drilling but that it. uses standard scx24 hardware Have fun building this DIY frame kit for the Scx24!
P
Printables
Axial SCX24 Lexus GX470 / Deadbolt 4 Link Conversion + High Clearance Links
High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…
P
Printables
scx24 injora low center of gravity frame receiver, battery and magnet mount
a mount for receiver and battery also a mag mount for the frame I'm using the furitek unity
P
Printables
scx24 meus mb24 battery/receiver tray
scx24 meus battery tray i used a unity brushless motor
P
Printables
SCX24 Buggy kit for COMP Crawler build
this buggy kit has holes already drilled will require hardware. comes with a custom skid plate and battery tray. I own a SCX24 so I know that this buggy will fit it. Have fun printing! and pls put pictures of your builds in the comments.…
P
Printables
Scx24 trailer bearing axles
This is a remix of the original scx24 trailer axles, but these use bearings and are stronger than the original ones. two 10x15x4 bearings are required for ONE axle. I used grease in mine to smooth out the operation and make them less…
P
Printables
scx24 deadbolt lightbar replacement
I didn't like the look of the stock deadbolt lightbar, or without the light bar, so I designed this. This simply bolts into the original cage, and fills the space where the lightbar used to go. Category: Mechanical Toys
P
Printables
Head Light Mount For SCX24 JLU
Moves stock bumper-mounted headlights to be where the ones on the body are. Just sand/scrape the paint from behind the headlights on the body, move the front body mount down to it's lowest position, and mount with 2 screws each on the…
P
Printables
SCX24 Gladiator Inner Fender
Fits as shown on the SCX24 Gladiator models, and possibly power wagon since it has the same wheelbase. I do not know about the others since I do not have available to test The screws I am using are the originals from stock, since the…
P
Printables
SCX24 Gladiator Rock Sliders
The original had the best scale look out of all that I found, but just wanted to add something a little bit more decorative.
P
Printables
SCX24 Gladiator Modified Front Shock Tower
This is a front shock tower to replace the stock when using the Injora Fat Viper motor. Sorry about the pictures not being the best I was already a few steps along before I remembered about them. It was designed to fit the Gladiator model…
P
Printables
Scx24 competitiom body
this body is made to fit on the custom lcg chassis by N0_Lan ( the betty version) in the files is inlcuded fuel tank for mounting a magnet also there are fender that i made but they are not included in the picture ! happy printing , in…
P
Printables
Storage box for Axial SCX24 Deadbolt
This is a simple storage box to hold an Axial SCX24 (Deadbolt wheelbase). It is based around another SCX24 stand that I designed (see my other models). It also incorporates a storage area below the crawler for storing small objects such…
P
Printables
Axial SCX24 stand
Here is a simple stand to hold an Axial SCX24 (Deadbolt wheelbase). It also incorporates a storage area below the crawler for storing small objects such as the charger and cable, etc. It is based around the stock Deadbolt wheelbase…
P
Printables
SCX24 Brushless motor mount
This is a brushless motor mount for the scx24. It was designed for the Furitek Micro Komodo motor. The micro komodo motor utilizes a 9mm spacing between the mounting holes. It potentially could work for any brushless motor that utilizes…
P
Printables
MRC full chassis kit for Scx24 in MILLIMETERS
hello, This chassis kit will require screws that you can get with an assortment kit from hobbypark on Amazon for Scx24. May require tapping for m1.4 screws cheap tap on ebay. File is in Millimeters for printing with JLC3DP for less than…
P
Printables
SCX24 Gladiator Battery Tray
I already had a bunch of 3S batteries and saw no reason to not use those during my upgrade; only problem they didn't fit well with the stock tray. This is super simple to print and prints perfectly fine flat or standing on end. It fits in…
P
Printables
lcg scx24 chassis
i made this chassis by myself to lower the center of gravity on my scx24 jeep gladiator , its lengt is universal so it will fit every scx24 everything is included in the pack , including rock sliders battery and esc mount are merged into…
P
Printables
SCX24 Buggy
This is a work in progress scx24 chassis I have been working on for myself but have decided to list for free. It may not work with all stock or aftermarket parts, but you may be able to make alternative parts work. This was designed to…
P
Printables
Classic cruiser FJ45 Scx24 Deadbolt body shell.
Might have to fix some issues but easy and cheap to print.
P
Printables
SCX24 Deadbolt classic cruiser new body design WILL PRINT!
this is a model that will print and come out good. ENJOY! MRC.
P
Printables
scx24 ski
Take out front diff or take out front axle. Depending on how you print it, it can be fragile.
P
Printables
Scx24 Injora Beadlock rings
!!!!!! WARNING!!!READ!!!!!! Be carefull when installing, tighten the first screws just a bit, then on the opposite end and so on. PLA bends and breaks easily, idk how petg reacts tho. I am not to blame if you brake it, i had no issues…
P
Printables
SCX24 Flex Link Mod
This is the best mod for your SCX24 for only a few cents of filament! Gives your rig around 65% more flex! This is probably my most favorite mod I have ever made. To install you will want to remove your shocks from the towers and put them…
P
Printables
Scx24 C10, Bronco, Jeep and gladiator. Military truck body
this model is easy to print made it in Onshape so should have no problems printing.
P
Printables
1980's Ford truck Scx24 basecamp and C10 fit wheelbase!
this model is easy to print. Have fun with it I would love to see some pictures!
P
Printables
Half cab Scx24 any wheelbase military truck body
easy to print great half cab for builds. ENJOY!
P
Printables
SCX24 tracks -NO HARDWARE-
I know there are some tracks already available, however, they were way too big for my truck, not very scale and you need additional hardware. Also if your axles have caster these other tracks won’t fit. With my design you only need: 24…
P
Printables
SCX24 truck hardbody BAHA Basher
This truck was made for the SCX24. This model does not have a specific way to mount it onto the crawler.
P
Printables
Mercedes g wagon g63 6x6 for Scx24 or trx4m.
this model was a boxy looking 6x6 truck but LittleGuyMiniModels help me make it look great! I hope you think it looks great too! I will be releasing slowly a frame and other parts for the build too! The old version is the picture Thanks!…
P
Printables
Ikea Skadis Scx24/fcx24m/trx4m/ascent18/fcx18/fcx24 Holder
Designed for the Littleguyracingparts Super 8 axles, which means anything with an wheel to wheel of up to 13.5cm. Stock width is like 9.5cm. Works with stock axles, stock axles+hex extenders, Meus isos, Lgrp super 8s axles without hex…
P
Printables
R4FGM CASE SCX24 SLIDER
Combined a SCX24 slider and R4FGM case into one unit, so no tape or glue is needed to mount receiver.
P
Printables
scx24 wire clip
a little wire clip that can be screwed onto the frame to help clean up wiring.
P
Printables
losi mini t rims for scx24 tires
30% infill for 57mm tires use supports wheeeeeeee Category: R/C Vehicles
P
Printables
Scx24 lower link extension for 6x6 conversion
this block allows you to build a 6x6 without buying a longer frame. it allows the axle to move more than buying a frame with holders for the links! it works great on my 6x6 build and it should work good on yours! requires two M1.4 screws…
P
Printables
SCX24 custom build
Build list: -Fat Viper motor -Injora carbon fiber LCG frame -MBL32 brushless ESC -Injora T6 transmitter/receiver -Ovonic 3S 850mah battery -Injora servo, soon RS100 to allow front bumper to fit. (Could push back injora servo a few mm)…
P
Printables
MRC 6x6 frame for Scx24 conversion
this 6x6 chassis comes with everything expect hardware and mounts but I will separate post them. download the on axle link mount it works great! Thanks! MRC
P
Printables
SCX10-scx24 Pro Frame conversion
downsized frame from scx10 to scx24 . skid plate included I used and battery/ESC/receiver tray I put together.
P
Printables
Scx24 Tremor chassis upgraded skidplate
If printed with no elephant's foot, it should be a perfect fit. (See differences below.)
P
Printables
SCX24 Jeep Tire Mount
Tire mounts using a 3mm machine screw. Self-tapping. I used a 3mm x 5mm machine screw
P
Printables
Axial RC SCX24 Base Camp Body Lift
File has one pair to print twice, and a 12x40x9mm block to lift the front body mount. I highly recommend using a smaller nozzle, but it should be possible with 0.4mm nozzle. I used a 0.3mm and black PLA. The holes are small enough not to…
P
Printables
Axial RC SCX24 Base Camp Bed and Roll Bar
Axial left the bed looking lame so dress it up with this cosmetic accessory. Prints in 4 pieces but looks like one piece in the file. Separate it into parts and arrange on the plate per my screenshot - flat sides down. Use a smaller…
P
Printables
SCX24 Transmitter wheel thumb extender
SCX24 Transmitter wheel thumb extender. For single-handed transmitter use. This lets you have a free hand while driving, so you can film with your phone, eat a tasty sandwich, or do anything else your other hand needs to be doing.…
P
Printables
SCX24 wall mount holder
Holds an SCX24, the transmitter, and has a tray for spare batteries, etc. I printed it in PLA, no infill, three walls.
P
Printables
SCX24 Magnetic body mounts
You can use just the front to make life easier and get rid of the body clip or use both front and rear. Your body will come off very easily if you use front and rear. To fit the rear one, you might have to do some hole reaming or make the…
P
Printables
SCX24 Side Plate
Side plates for the Axial SCX24 crawlers. These are similar in size to the Injora design but designed to take the materials into account. I have used these to mount the battery and radio lower for a better COG. You will need to clone and…
P
Printables
SCX24 Rock Slider Low CG Battery Holder Saddle Bags
Original battery pack died and the 2s drone batteries don't fit in the stock location. These were designed around Tattu 2s 550mah batteries that are about 60mmx15mmx18mm but are oversized to accommodate possibly larger batteries. Use…
P
Printables
SCX24 BB Wheel Weight Inserts
Printed using 100% infill and Generic TPU. BB's are standard 4.5mm from walmart or amazon.
