SCX24 - Snowplow with Functional Snow Blade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Snowplow for your SCX24 that is fully functional with a proportional blade, allowing you to push snow to either side.
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 151
- Wydruki
- 0
- Wyświetlenia
- 2165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SCX24 Snow plow with fully proportional blade allowing you to push snow to either side of your 24th scale road.
Using this mount you will be able to mount this directly to the front of your SCX24.
I have a FlySky FS-GT5 utilizing the channels as follows:
Channel 3 - Light Controller for Blade lights, Ditch lights, & Roof Light Bar
Channel 4 - Raise and Lower the Blade
Channel 5 - Used to pivot the blade left or right
You will need 2 sub-micro servos, such as the EMax, or AGFRC. You will also need the additional servo arms that ship with many of the sub-micro servos, including the EMax servos.
1 - Servo - Raise and Lower Plow Blade
1 - Servo - Adjust Blade either left or right
20 - 1.4mm x 6mm Hex head screws
1 - 1.4mm x 12mm Hex head screw
1 - 1.4mm x 10mm Hex head screw
On the front of the blade I used a set of White LED's from a stock SCX24 to illuminate the road ahead. The lights seen in the pictures, (LED's on the front of the Blade, LED's on the roof and the LED ditch lights) are all plugged into a light controller using Channel 3 on the FlySky GT5.
Assembly is pretty straight forward. Once the mount, servos, linkage and plow blade are all assembled. The entire setup can then be removed with two screws that attach to the SCX24 chassis bumper mount.
I printed all parts in PETG for durability.