SCX24 Trailer for Mini+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made some changes to trailer for Prusa Mini+
- Ocena
- 0 / 5
- Polubienia
- 75
- Pobrania
- 186
- Wydruki
- 0
- Wyświetlenia
- 2391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
I currently have the Prusa Mini+. After downloading the trailer bed, I found out that the trailer bed was too large to print on the printer. I split the trailer bed in 2 pieces and created rails to act as a frame for the bed to be 1 piece again.
Also, just FYI if you're planning on printing this awesome trailer designed by James Spadaro, just know that you will need 8 total outer axle pieces. And unless you are building the walls for the trailer, you do not need the trailer bed side stop back or front pieces.
The rest of the parts can be found on James’ page. This is just the remixed trailer bed for the mini.