1 / 6
SCX24 - AX24 - Steering Link with Included Drag Link — zdjęcie 1
1 / 6

SCX24 - AX24 - Steering Link with Included Drag Link

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A stock width Steering link with included Drag Link. These are compatible with all SCX24 models, as well as the new AX24

Ocena
4 / 5
Polubienia
59
Pobrania
415
Wydruki
1
Wyświetlenia
1913
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Axial SCX24 and AX24 compatible stock width Steering Link with included Drag Link

I was wanting a color matched Steering and Drag link for my Orange AX24, a few moments later I had these printing for my enjoyment, in the color of my choice.

The Steering link is stock width. I may make a few other variations for “Toe-In/Toe-Out” setups. If you are interested in alternate widths so that you can create a “Toe-Out” setup for better steering radius etc., send me a message if you are interested and that may accelerate the creation of new widths.

The Drag link is also stock length and adds a nice splash of color to your crawler.

Printed in PRUSA Orange PETG
0.15mm Layers

 

Installation

Using all stock hardware.

Very Carefully remove the old Steering and Drag links. The stock ball ends can break so be careful removing the stock links. You will also need to remove the stock Ball-End from the stock steering link and install on the new Steering Link.

Note
I used brass pivot balls in my build (see pictures), the stock ball ends will work as well. 

 

Tagi