SCX24 - AX24 - Steering Link with Included Drag Link
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stock width Steering link with included Drag Link. These are compatible with all SCX24 models, as well as the new AX24
- Rating
- 4 / 5
- Likes
- 59
- Downloads
- 417
- Makes
- 1
- Views
- 1,920
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Axial SCX24 and AX24 compatible stock width Steering Link with included Drag Link
I was wanting a color matched Steering and Drag link for my Orange AX24, a few moments later I had these printing for my enjoyment, in the color of my choice.
The Steering link is stock width. I may make a few other variations for “Toe-In/Toe-Out” setups. If you are interested in alternate widths so that you can create a “Toe-Out” setup for better steering radius etc., send me a message if you are interested and that may accelerate the creation of new widths.
The Drag link is also stock length and adds a nice splash of color to your crawler.
Printed in PRUSA Orange PETG
0.15mm Layers
Installation
Using all stock hardware.
Very Carefully remove the old Steering and Drag links. The stock ball ends can break so be careful removing the stock links. You will also need to remove the stock Ball-End from the stock steering link and install on the new Steering Link.
Note
I used brass pivot balls in my build (see pictures), the stock ball ends will work as well.