Counting matching models…
________________________________________________________________________________________________________________ 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…
This is probably just about the smallest triaxial tourbillon mechanism that one can reasonably make with a .4mm nozzle. It's powered by a sping motor at the bottom an fits within a 96mm sphere. The only non-plastic parts are a couple of…
Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing. The Axial thrust bearing combined with a rigid lead-screw compression coupler completely eliminates Z-axis banding caused by the stepper motor “wobbling” under the weight of…
A mechanical digital clock with three digit wheels on different axes (X, Y and Z) from each other. Visually crazy but practical Driven by a single stepper motor All parts are designed within 180 x 180mm Easy time adjustment by manual…
A collection of spacers for the most common axial fan sizes. 120, 92, 80, 60, 40 and 30 mm The STL files have the spacer with a height of 100 mm, so you can use the Z-scale in the slicer to give it the exact height in millimeters that you…
Driveshaft for 1/24 scale crawler axial SCX24 and Probably AX24. First pass so still a little rough but practical. Designed this so I could flip my motor/transmission around for more weight forward. Needed custom driveshaft lengths. I…
I printed mine at 100% infill. Then I used CA glue right before screwing it down. Once I screwed down the insert, I made the cut.
2/21/21 FYI, To keep more up to date with what I'm doing I started an Instagram page @mcmaven.pdx, where I'm posting some of my 3D printing and other designs that I haven't posted here. Triaxial Tourbillon Clock Build Notes: (Download the…
This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to…
Axial SCX6 axle stands; separated by front and rear (since they're different). My goal was to have the strength to hold up a ~28 lbs truck, but use as little filament as possible. You'll need to complete, two rear verticals (they're…
This is a repository of .stl files that were used in the creation of a prototype axial flux synchronous reluctance motor. The video showcasing the motor can be found here: https://www.youtube.com/watch?v=SNQVJudd6BU Since the reluctance…
Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…
1/24 Scale 1996 Ford F250 for Axial Crawler Body
This is a Motorized version of my original Triaxial Tourbillon Clock Make. The two major changes are that this version uses stepper motors to driver the carrier, and it incorporates the Triaxial Quartz Movement Upgrade. However, there are…
Recently upgraded to the Micro Swiss NG for my Ender 3 v2. While the kit from Micro Swiss includes a shroud to use the stock 4010 axial hot end fan and 4010 blower part cooling fan, I wanted to use larger fans. I looked around and found a…
Through the following link you will get access to my Amazon Store Front, where you will find the shopping list for each project and other product recommendations. https://www.amazon.com/shop/adriancubas As an Amazon Associate, I earn from…
This is not necissarily meant to be printed, but can be very useful when you develop your own designs in a 3D CAD application. Use this axial 4020 fan model in your custom 3D designs.
Description General I have collected all SCX10 I & II parts i published on Printables so far. The chassis rails and skid of the SCX10 I are absolutely identical to those of the SCX10 II. So, many parts are suitable for both chassis.…
TruckNut kit for Axial SCX24. The kit is designed for the Axial SCX24 C10 but should work with other body styles, let me know in the comments. It is designed to be a fun joke to install. The trucknut holder piece should be glued into the…
Lazy Susans for plants or spools or plates or cakes - with optional clip keeping it together
I made this Cantilever Suspension to remove the rear shock towers so you can have more options for bodies on you Axial SCX-10. My Main goal was to use the stock shocks to keep the cost down. You will need to print the parts and purchase a…
Makes swapping batteries a lot simpler by keeping the body connected to the chassis. Uses the stock mounting points. Replaces the rear bumper mount and the mounting bracket connected to the roll cage on the body. 2 additional M3 holes are…
I have a small Stepcraft CNC router in my house and to keep the noise down I use a small Miele cannister vacuum cleaner with a bag and a secondary HEPA filter on a low noise setting to capture the dust and particles from cutting. I needed…
Body panels for the Axial Capra. I designed them as two parts, so the inserts can be printed in a different color. You can even used two different colors for printing the insert to add more contrast :-) The hood is a two-piece design to…
Add a nice quick detail to your Axial CJ-7 with hinge and vent covers. There's two sets of files included. The “easy” one, has the bolts printed and you'll just need to use double-sided tape to apply them; you don't even need to take the…
I found this on Cults and printed it using the SLS1S. It turned out really well except that the mounting pegs are just a few mm too narrow. I can still manage to mount it on my SCX10 Jeep but it gets tight. I also created a winch mounting…
High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…
I designed this gearbox for actual mechanical applications, so quite a few bearings are used. I don't have actual photos available right now, but I build a two-stage version printed with regular PLA that runs at fairly high input speeds…
By popular request (this time many people), I've created a full cover roof for the Axial Ryft RBX10. You'll need 7 - 2.5 x 100mm zip ties; I'd print this in PETG or Nylon for maximum strength; though really PLA will maybe hold up. For…
Chassis stand for the Axial SCX24 micro crawlers Designed fairly generic so it should fit most crawlers.
When building electronic an prototype, using a solderless breadboard or a PCB, you always need to bent leads of components to the correct spacing. A lead bender is a good tool for this. This design is a remix of OneByteGone's nice lead…
These dont damage the cables like staples. they hold the cable securely but they cable is still loose enough that you can slide and ajust it even when fully screwed down. Enjoy! And If you have a minute, check out my other models!…
Follow the assembly instructions of the original designs (Mr. BCRC and DJ_Food). Minor personal adaptations to incorporate rubber feet and other modifications.
Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the SEMA links on Cults. V1 and V2 have identical footprints/outlines – the only…
A little axial flux generator made as an experiment for a vertical axis wind turbine. Fits on a 12mm shaft. It doesn't output much power but is a decent example nonetheless. You'll need a minimum build plate size of 200mm x 200mm to print…
I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…
Link Riser ar44-45-45p axial scx 2-3 printed in pla-cf.
A simple axial fan dummy for help on your creation needs. Category: 3D Printer Accessories
I couldn't find a 1/10 scale roof rack that I liked. So I measured my real Pioneer Rhino Rack roof rack on my Jeep and scaled it down to 1/10. I decided to make the mounts magnetic so I wouldn't have to drill into the body of my Jeep…
RC holder for axial or wall mount držák na zeď/police rc modely, axial,buggy,monster truck 1/10 a některé i 1/8
An adapter to enable using a 50 mm axial fan on a 40 mm axial fan mounting. Due to space constraints, you will need to thread the 4 mm bolts into the plastic. Print instructions Category: 3D Printer Accessories
Use this to convert a 80mm axial fan to a blower fan, you need to break the blades and sand the original fan to convert.
For this Remix you can follow the Assembly instructions of the Original Design. This set will only replace 1:1 the parts from the original with the ones from here. The Center Carrier of this set provides an additional advantage over the…
Whipped up a 40mm width mount for the nice front bumper farmersmark has made: https://www.thingiverse.com/thing:3531283 fits like a glove. I was lazy and you have to drill a hole through the smaller through-hole to attach the original…
Bambulab X1C printer, BAMBULAB carbon filled PLA, 300mm/s, 232° Nozzle, 45° bed
Details need to be mirrored.
If you want to use Losi Mini-T springs on your Capra or SCX10.3 shocks, these spring perches will allow you to make the conversion. The lower perch is designed to allow popping it off over the shock shaft without removing the rod end, so…
The panhard bar on the SCX6 is mounted single shear on both ends. No bueno. This brace reinforces the mount on the axle. Uses the stock hardware, no additional parts needed. To reinforce the chassis mount I recommend a metal shock tower…
Designed for my Axial Capra after I broke the original. Works great for me, enjoy!
Axelstand for your rc crawler more specific Axial SCX10 III portal axels AR45P (AX1232022, AX232023). Can be used on front and back. Hardware 2x M3 x 8mm Cup screw 2x M3 nut For more info in swedish Buttyboys.se…
Axial SCX6 battery extenders for the Gens Ace Bashing Pro 157mm 3S (8000mah and 6700mah) packs and the XL version for Gens Ace Bashing Pro 178mm (15000mah). New - Looking to get these tray extenders, but don't have a printer? Checkout my…
Fanmount for a 5015 Blowerfan for partcooling and an 40mm axial fan for the hotend. The Blowerfan needs melt-in inserts to mount. The fanmount can be printed in PLA, the airduct must be printed in PETG or more heat resistant. Works great,…
Front : New version stronger and looking more like the orginal one. But still very short ! Rear : just the same with reinforcement. Print Settings Printer: anet A8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Notes: Printed on my…
Modeled to replace the standard fans FAN-0118L4 with Noctua NF-A8 PWM fans in a 2U Supermicro Server SCE829. As stated by Supermicro the FAN-0118L4 is a standard fan for CSE-218UTS, CSE-219UTS, CSE-828TS, CSE-829, CSE-835XTS, and…
Modular Coaxial Rotor This is a highly detailed 3D printable assembly designed for compatibility with helicopter modular systems. Inspired by functional aerospace aesthetics, this coaxial rotor/propeller is perfect for hobbyists. Key…
Ikea-Lack housing fan duct for a 92 mm fan with static pressure enhancer (axial compressor). Helps to extract odors from the enclosure and remove them using an optional 50mm suction hose. Update 05.04.2022: In order to increase fan static…
Hollow Display Turntable / Axial Ball Bearing Compatible with standard airsoft pellets aka BBs, 36 of them. Works even better with 6 mm steel balls. Smoothness : Super smooth, even more smooth with steel balls. Smooth even under heavy…
This is a 180 degree latching hinge for half inch pvc pipe. This allows you to connect two pvc pipes end over end and have them split apart. The latch firmly locks the pipes when closed. It works by locking a beam in with a spring and…
Quick little remix to work with the 67mm Gspeed Gshot builds. 38mm mounting accepts TGH and 3 gear Axial. Also more than likely accepts Enduro Stealth X transmission.
Me and my friends thought it would be funny to use a jet engine to propel our boat for physics Olympics, so I am designing one. Meant to be run on a 3V motor run on a 9V battery. Held together with 6-32X2 in. nuts and bolts, main axle can…
as I had no matching radial fan at home, I have a normal fan rebuilt.
These are rock sliders that can be installed on the Axial SCX10 iii Basecamp. I printed these from Prusament PLA as a prototype and have yet to break them. If they break, I plan to use some Prusament PC blend CF. You will need two M3x10…
A trailer hitch that bolts up to the SCX6 rear bumper mount without any mods. I broke the ball hitch pretty quickly but it is holding op nicely now in TPU. Required hardware: 4x M4x22mm 1x M2.5x10mm Category: R/C Vehicles
Yo Dawg, I heard you like filament? So I made filament that can be printed out of filament! There are a few models out there that allow you to print your own multicolor filament — they work great and I have used them many times to create…
3D printed dual stage axial fan. This was designed as an airbrush booth fume extractor, but it's so loud it will never be used as such. DISCLAIMER: THIS THING IS NOT A TOY! I AM NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY DERIVED FROM IT'S…
Coaxial Cable Stripper - RG58 / BNC Tool for stripping RG58 coaxial cable for BNC-type crimp connector. For use with standard utility blade (Stanley, DeWalt etc) and two 30mm M3 screws and nuts. Print settings Fill density: 15% Fill…
There is a more complete publication on Thingiverse. (It's a competition entry). When the competition is over I will propagate it to here: https://www.thingiverse.com/thing:6804974 Video of it printing: Mechanism overview and how to…
This version is designed for the Ender 5 and may also work with the Sovol SV05. You will need longer M3 Bolts to install this upgrade. Z-Axis Axial Thrust bearing Mount. The Axial thrust bearing combined with a rigid lead-screw…
This is a DIY Project for a Metal Detector. The diameter of the coils are 254mm (10") and 127mm (5"). When the coil is inserted you can use silicone to fix it and create protection against environmental effects (water,..). There is a hole…
Scale accessory for Axial SCX10 III Jeep JLU Wrangler. Roof rack that can be mounted in the front, middle, or rear of the roof. There are two mounting options: either using double-sided adhesive tape or by screwing it directly through the…
A much bigger receiver box for stock SCX 10ii. Did it for a friend and cannot find his photos anymore. Print instructions Category: Mechanical Toys Summary A much bigger receiver box for stock SCX 10ii. Did it for a friend and cannot find…
Made an organizing for 1/4 Watt axial resistors. Inspired by this very cool smt resistor organizer: http://aidetek.com/mm5/merchant.mvc?Screen=PROD&Store_Code=A&Product_Code=BOXALL&Category_Code=Encl
2021 Update: I don't recommend this design. Never got around to finishing it or making it work properly. Update 03/22/17: Updated to 3.10 version. Some tweaks to clearances around transmission. Update 03/16/17: Uploaded re-worked design.…
An accessory bar for the Axial CJ-7, fits the passenger side by default (just mirror drivers side). Two files, one with 3 holes (fix two of my 1/10 Scale Off-Road Fuel Canister ) and one with no holes so you can drill your own. Update…
Ran into an issue where a fan stopped working on my ender 2 pro. I couldn't find a 5010 24v fan to buy other than the one that came with it, that only lasted 20 hours of operation. So I drew this up to print out on my other machine. I did…
The Real Time Clock module increases the clocks time accuracy. No need for tuning of the clock speed as described in the original model. The price for a DC3231 RTC model is usually less than 12€ for 3 pieces. The housing is made for an…
This is my attempt on using a silent 4020mm axial fan for cooling the heatsync. Haven't tested it yet during printing, but after my first tests on the bench, it feels like the airflow is about the same as the tiny radial noisy fan that…
The stock grill for the Axial Capra looks to be inspired by a Toyota Land Cruiser. I made this grill to look closer to a Jeep 7 slot grill. Sorry, no angry eyes.
808025 Axial Fan Holder for 3030 Frame Stepper Cooler RatRig V-Core 3 uses 2x M4 bolts and nuts & 3x M6x12 bolts and 3x T-nuts (you probably have some T-nuts and M6x12 bolts left from your V-Core 3 build anyway.) If you already used your…
Axial Wraith front lower cover so that less dirt enters the vehicle from below. Fits into the existing screw holes. Axial Wraith vordere untere Abdeckung, damit von unten weniger Schmutz ins Fahrzeug gelangt. Passt in die vorhandenen…
This is an upgrade to my remix of A26’s original design, which was based on the Astronomia Triaxial watch mechanism. It can be used to replace the clock face of the remix with hands that are driven by an inexpensive quartz movement. This…
Axial Ryft RBX10 front cage/shock/stand-off protector. Keeps things a little cleaner and protected. If you can you'll want to print the top section (that raises up) with 4-6 walls for maximum durability; use PS modifiers to set this up.…
A second valve cover for your SCX6, based on the same thing for an SCX10III. Print without supports, stick on your steering servo with some double sided tape. Category: R/C Vehicles
Inspiration of Intent When considering an upgrade to enhance the part cooling capabilities of my printer, I prioritize two key aspects: notably reduced noise compared to the stock configuration and the ability to achieve higher printing…
This model is not designed to be printed, but rather to aid in designing hardware (for example a printer).
This is a link riser for the rear upper links of an axial capra RC car. I found that the print orientation has a huge effect on the part's strength. PLA or PETG at 100% infill works well. EDIT: I added the fusion 360 file. I'm a complete…
File has one pair to print twice, and a 12x40x9mm block to lift the front body mount. I highly recommend using a smaller nozzle, but it should be possible with 0.4mm nozzle. I used a 0.3mm and black PLA. The holes are small enough not to…
This is a replacement differential cover for an AR60 axle. The original model is by Michael Salem from GrabCad: https://grabcad.com/library/axial-wraith-rock-crawler-buggy-1 I've modified it for size and strength. The rim and braces are…
mount a 30 mm axial fan in place of a 40 mm fan. can be used if you want to reuse a 3010 heat break fan with a custom fan mount for 40 mm fans. tinkercad design Category: 3D Printer Parts
I made these when I was testing axial vs blower fans for print cooling. 5015 fan mounts just by friction, 4010 & 4020 fans mounts by basic 3mm wood screws. Video if you want the details:
Coaxial Cable Stripper - RG214 / N-Type Tool for stripping RG214 coaxial cable for Jyebao N3100A N-type crimp connector. Fits several other N-type connectors as well. For use with standard utility blade (Stanley, DeWalt etc) and two 30mm…
This is a tiny clip designed to help in winding an air core choke balun (a few loops of coaxial cable which reduce common mode currents). See here for more information on this. The clip is symmetrical (print twice to get a pair). Put…
Looking for a clean, adjustable, and fully compatible battery tray solution for your Axial SCX10 III Coyote ? This tray is a drop-in alternative to the original Axial AXI-2999 battery tray , offering flexibility without compromises. Key…
Just a simple Nema 17 Stepper Motor Mount with integrated Axial Thrust Bearing for CNC Machines. The Axial Thrust bearing supports the flexible coupler and allows you to use a locking collar on the other end of the lead screw to help…
This is a new roof rack that uses the same mounts as my previous model. The idea is that you can replace the roof rack without having to modify the mounts if you have drilled and screwed them into the car body. Link to previous model:…
As a longtime fan of the Fallout series, I wanted something cool for my Capra that matched the Fallout blue and yellow color scheme. I found the fantastic panel designs by Mh2241 , which I was able to get into Fusion and remix using other…
Fits Axial 1.9 bead lock wheels. Category: R/C Vehicles
Instead of being for just an axial 4010 hot-end fan, its now 3 :) I made the vents to work well with my NF-A4X10 axials to replace the loud blowers that come stock. (Fitted on a 3v3 KE - Not tested on the SE but should fit) Aesthetically…
A mount for the Castle Mamba X to the Axial Ryft RBX10. You'll need 2 x M3x12mm to mount the holder to the truck. You'll want to continue to use the stock mount as this allow for zip ties to still be used. The mount should be friction…
