Axial Ryft RBX10 - Full Clamshell Roof
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.57 – €9.25 net (excluding VAT)
For file: Ryft RBX10 - Roof Clam Shell - TiV - V3_0.2mm_PLA_MK2.5S_8h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.41 excluding VAT (range midpoint).
- Weight reported by the author
- 99 g
- Print time reported by the author
- 8.71 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Axial Ryft RBX10 clamshell full cover roof
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 279
- Makes
- 0
- Views
- 1,910
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
By popular request (this time many people), I've created a full cover roof for the Axial Ryft RBX10.
You'll need 7 - 2.5 x 100mm zip ties; I'd print this in PETG or Nylon for maximum strength; though really PLA will maybe hold up.
For getting the infill off, I found the best way, was to get a thin knife or lifter under the infill and work it all the way around, if you've got your printer set right it'll all come off in one piece.