1 / 4
Axial RC SCX24 Base Camp Body Lift
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lifts the stock body and bumpers by 10mm for looks and larger tire clearance.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 117
- Makes
- 1
- Views
- 490
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
File has one pair to print twice, and a 12x40x9mm block to lift the front body mount.
I highly recommend using a smaller nozzle, but it should be possible with 0.4mm nozzle. I used a 0.3mm and black PLA. The holes are small enough not to need supports.
It might be obvious, but you'll also need a couple more screws too.
