1 / 4
Axial RC SCX24 Base Camp Body Lift
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lifts the stock body and bumpers by 10mm for looks and larger tire clearance.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 117
- Wydruki
- 1
- Wyświetlenia
- 490
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (22)Powiązane
File has one pair to print twice, and a 12x40x9mm block to lift the front body mount.
I highly recommend using a smaller nozzle, but it should be possible with 0.4mm nozzle. I used a 0.3mm and black PLA. The holes are small enough not to need supports.
It might be obvious, but you'll also need a couple more screws too.
