SCX24 Beadlocks for Hyrax
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1.0” beadlocks optimized for ProLine Hyrax 1/24 crawler tires
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 1500
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Background
ProLine’s 1/24 Hyrax tires currently only come pre-mounted on their plastic beadlocks. The wheel width is a little narrow for my taste and results in an egg shaped tire profile. When mounted to both styles of Treal beadlocks I own, they either slipped on the bead or came off the bead.
Design
I decided to dig further in PrusaSlicer hacking of the other printed wheels I did by adjusting diameter, offset, & width of the set while also improving the screw pockets for the ring and wheel.
The result is now a tire that stays on the wheel, has a wider flat profile, increased contact patch, and has a softer feel due to less foam compression.