1 / 2
Universelle Tragflächenbefestigung für Action Cams / Universal wing mount for action cams — zdjęcie 1
1 / 2

Universelle Tragflächenbefestigung für Action Cams / Universal wing mount for action cams

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Universal wing mount for action cams with gopro mount

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
81
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Universelle Tragflächenbefestigung für Action Cams

Halterung, um Action Cams mit GoPro kompatibler Befestigung (GoPro mount) einfach auf beliebigen Modelltragflächen zu befestigen.
Die eigentlich Halterung ist um 6 Grad gegenüber der Basisplatte gekippt, dadurch wird die Flächenwölbung ausgeglichen und der Kamera-horizont steht parallel zum Rumpf.

Befestigung an der Fläche:
• Klebeband auf Tragfläche im Montagebereich kleben. Das verhindert ggf Kratzer auf der Tragfläche.
• Halteplatte mit montierter Kamera auf der Fläche mit Klebeband fixieren. Ich habe auf jeder Seite der Basisplatte 2 Streifen Nitto-Tape verwendet
• Ggf Ausgleichgewichte auf der anderen Seite der Tragfläche anbringen (ebenfalls mit Tape)
• Fertig

Auf den Beispielbildern wurde eine DJI Action 3 auf einem Orca Pro montiert. Hält einwandfrei auch bei einfachem Kunstflug.

Material: 
PETG (PLA oder ABS sollte ebenfalls kein Problem sein)

---

Universal wing mount for action cams

Mount for easily attaching action cams with GoPro-compatible attachment (GoPro mount) to any model wing.
The actual mount is tilted by 6 degrees in relation to the base plate, which compensates for the curvature of the wing and the camera horizon is parallel to the fuselage.

Attachment to the wing:
- Stick adhesive tape to the wing in the mounting area. This may prevent scratches on the wing.
- Fix the mounting plate with the camera mounted on the wing with adhesive tape. I used 2 strips of Nitto tape on each side of the base plate
- If necessary, attach equalising weights to the other side of the wing (also with tape)
- Finished

The example pictures show a DJI Action 3 mounted on an Orca Pro. Holds perfectly even with simple aerobatics.

Material: 
PETG (PLA or ABS should also be no problem)

Tagi