Cable Guide Loop / Anchor Pass-Through / Cable holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple cable pass-through for lifting cables off the floor and guiding them toward organizers.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a lightweight cable guide designed to lift and route cables above the floor or desk surface. The model allows you to pass a cable through it to keep it suspended or fixed along a path before it reaches a proper holder or clip.
It’s useful for:
– Preventing cables from dragging or tangling on the floor
– Creating clean, elevated cable paths
– Preparing cable entry into desks, devices or holders
Can be attached using:
– Screws
– Double-sided tape
– Adhesive pads
– Mounting strips
The internal diameter is suitable for standard charging or peripheral cables and can be scaled as needed.
Recommended print settings:
– Material: PLA or PETG
– Layer height: 0.2 mm
– Supports: usually not needed
– 3+ walls/perimeters for durability
Simple and functional, ideal for clean cable management.