Kids Mailsbox with Flag and Name
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small (Indoor)-Mailbox for Kids with their name and flag
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
This is a Mailbox for kids to play with and get their own mail. Fits regular postcards.
Though this concept is hardly new or inovative, this design is made to be fully 3d-printed without special hardware (no screws, nuts, no special printer with multicolor, …).
You can use screws (≤4mm) or duble-sided tape like Tesa-Powerstrips to mount it to doors and walls.
Flag-Nut might need a drop of glue if it comes loose to often.
Print Recomendations:
- Box, Lid → Layerheight 0.2mm
- Flag → Layerheight 0.15mm
- Flag-Nut → Layerheight 0.15mm, might need a raft to avoid blocking the threads
Post-Processing:
The Flag has a small bridge implemented that you may need to cut (see pictures).
Letters / Names:
Single letters are provided in the Letters folder. Additinally there is a LetterBox_Boundry.stl which you can use to test if your letters / your design fits on the post-box (see pictures).