2-bobbin tube for EEW 6 sectional bobbin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A longer tube to allow for a 2-bobbin set with the sectional bobbin system
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 65
- Wydruki
- 2
- Wyświetlenia
- 214
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Use the original discs and plugs from Maurice's sectional bobbins. You need:
- Two tubes
- Four discs
- Three plugs
I recommend using an inner brim of 5mm to help with adhesion. It peels right off fairly easily, then you can clean up any remaining brim with a deburring tool. Supports not required.
--
If you like my work and want to support me, please check out my online store or become a patron. Thank you!
--
Don't want to print your own bobbins and would rather buy a pre-made version? I have the pre-made two-bobbin set available here.
--
Licensed for personal or commercial use, per the open source licensing Maurice uses for the other EEW-related STLs he releases. If you sell finished prints using these files, please let me know so that I can refer any customers not local to me your way!