2-bobbin tube for EEW 6 sectional bobbin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A longer tube to allow for a 2-bobbin set with the sectional bobbin system
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 65
- Makes
- 2
- Views
- 214
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Use the original discs and plugs from Maurice's sectional bobbins. You need:
- Two tubes
- Four discs
- Three plugs
I recommend using an inner brim of 5mm to help with adhesion. It peels right off fairly easily, then you can clean up any remaining brim with a deburring tool. Supports not required.
--
If you like my work and want to support me, please check out my online store or become a patron. Thank you!
--
Don't want to print your own bobbins and would rather buy a pre-made version? I have the pre-made two-bobbin set available here.
--
Licensed for personal or commercial use, per the open source licensing Maurice uses for the other EEW-related STLs he releases. If you sell finished prints using these files, please let me know so that I can refer any customers not local to me your way!