1 / 5
1.25 inch Oval EMT conduit junction box cover+gasket — zdjęcie 1
1 / 5

1.25 inch Oval EMT conduit junction box cover+gasket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

To replace a discontinued cover without replacing the whole box

Ocena
0 / 5
Polubienia
2
Pobrania
21
Wydruki
0
Wyświetlenia
104
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I broke the cover on the 1.25" conduit junction box going into my shed. All the new boxes seem to be rectangular, and I couldn't find any replacement parts online, so I drew one up in FreeCAD. 

Included are the body and gasket. I happened to have some TPU laying around and it was not much more trouble to add the gasket, so there it is. Depending on where your junction box / elbow is located, you might not even need it. Otherwise, use some silicone sealant, RTV, whatever. You've got a 3d printer, so if you break the replacement cover, just print a new one.

Flip in your slicer so the flat part is down. No supports needed. I printed the body in PLA and the gasket in TPU. It's a really basic part, nothing fancy needed. 

 

Tagi