Enclosure for Mini Belt Sander from Aliexpress, 25mm belt width
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure with air duct to reduce dust when sanding.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is for the Aliexpress belt sander that looks like the one in the picture (ONLY that one) with 25mm belt width
You can buy the sander here:
https://s.click.aliexpress.com/e/_c3x0ST19
https://s.click.aliexpress.com/e/_c4W2HCbH
You will additionally need:
2x 8mm (or longer) M4 T-Head
7x 5mm M4 T-Head
https://s.click.aliexpress.com/e/_oopql1Y
https://s.click.aliexpress.com/e/_oomNb3y
To mount the motor casing use the screws provided when removing the metal casing
BEWARE:
You print it in some plastic… If you sand, sanding debries might melt the plastic and cause the enclosure to malfunction.
Bonus:
I added some key to keep the spring loaded roll in upper position, this helps to change the belt