Carbonara lightweight CF tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Repository for Carbonara
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 382
- Wydruki
- 7
- Wyświetlenia
- 3563
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
GITHUB
Carbonara CF tube
Carbonara is a high-endurance, high-quality carbon fiber X beam for Voron and Monolith 3D printers, utilizing the stock build sizes of 250, 300, and 350.
Key features:
High torsion resistance
Made with high-temperature resin. 110°C short-term temperature resistance, good for 90°C chamber.
Ultra light, up to 58% weight reduction from a standard 2020 aluminium extrusion (before hardware and inserts).
Smooth 3K carbon strand finish
Pre-drilled, easy installation
Unmatched price/performance
Real-world prototype testing results:
• Test log 1 - Compression and temperature
• Test log 2 - Torsion and temperature
Tested for 800 hours at VERY high speeds, 500-1300mm/s @ 50.000-100.000m/s² with 80ºc chamber.
Printer Build Size (mm) | X Gantry Length (mm) | Carbonara Weight (g) | 2020 extrusion Weight (g) | Weight Reduction |
250 | 330 | 64,7 | 157,1 | 58,8% |
300 | 380 | 74,5 | 181,0 | |
350 | 430 | 84,3 | 204,8 |
Warhammer 40k Laspistol prop in ABS 285ºc 500mm/s 20.000mm/s2
IMPORTANT!
The printed inserts are a MUST to ensure maximum performance.
Make sure they are all aligned and facing the same direction.
The inserts must be a snug fit, not loose.
Hollow spacers aren't mandatory, they are only used to facilitate installation.
Inserts must be printed in CF/GF filament with HDT ≥ 110°C, such as, annealed PET-CF, PCPBTGF, etc.
The indented part of the printed inserts is meant to face the linear rail.
Check if our partners have Carbonara available:
3DKATTEN - Europe
JB3D - UK
3DLabTech - Canada
DREMC - Australia
West3D - US
Fabreeko - US
KB3D - US
DKSupply - US
Sellers offer printed parts and hardware, but if you want to self-source, follow the
Google Sheet: BOM for the inserts and tube
The full, detailed CAD is available in the Monolith Discord.
This project has been made in collaboration with the Monolith team
Special thanks to:
Adeo: Ko-Fi, Github
For the amazing temperature and torsion testing
(can be found in the Monolith Discord)
For the incredible mounting inserts
Panzarkatten: 3DKATTEN
For the thumbnail picture
TZ: Zen3D
For hosting the Gantry Updates site
If you wish to support me, Ko-Fi
------------------------------------