1 / 7
Lululemon Belt Bag Dog Poop Bag Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dog waste bag dispenser inspired by the Lululemon Belt Bag
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to fit a 3cm diameter x 6cm length roll of dog poop bags.
- 15% infill
- Supports on build plate only.
- 0.2 Layer Height
- Seam: I recommend aligning the seam to one of the back corners of the belt bag top, otherwise it will show up near the logo on the front.
- Logo Charm: Pause at layer 15 and swap to a different color to make the horseshoe shape pop.
- Belt Bag: If you're feeling lucky, you can pause the print around layer 140 and thread the charms onto the keychain loop and continue printing. I had some issues with a seam line going across the whole bag if I did that, but you may have better luck. Otherwise add your own keychain clasps with the charms afterwards.
If you'd like to remix this model here is the OnShape link.
