1 / 7
Lululemon Belt Bag Dog Poop Bag Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dog waste bag dispenser inspired by the Lululemon Belt Bag
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 14
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to fit a 3cm diameter x 6cm length roll of dog poop bags.
- 15% infill
- Supports on build plate only.
- 0.2 Layer Height
- Seam: I recommend aligning the seam to one of the back corners of the belt bag top, otherwise it will show up near the logo on the front.
- Logo Charm: Pause at layer 15 and swap to a different color to make the horseshoe shape pop.
- Belt Bag: If you're feeling lucky, you can pause the print around layer 140 and thread the charms onto the keychain loop and continue printing. I had some issues with a seam line going across the whole bag if I did that, but you may have better luck. Otherwise add your own keychain clasps with the charms afterwards.
If you'd like to remix this model here is the OnShape link.
